Alternative Parts

  • LTC3417A-2
    LTC3417A-2

    Dual Synchronous 1.5A/1A 4MHz Step-Down DC/DC Regulator

Overview

Features and Benefits

  • High Efficiency: Up to 95%
  • 1.4A/800mA Guaranteed Minimum Output Current
  • No Schottky Diodes Required
  • Programmable Frequency Operation: 1.5MHz or Adjustable From 0.6MHz to 4MHz
  • Low RDS(ON) Internal Switches
  • Short-Circuit Protected
  • VIN: 2.25V to 5.5V
  • Current Mode Operation for Excellent Line and Load Transient Response
  • 125μA Quiescent Current in Sleep Mode
  • Ultralow Shutdown Current: IQ < 1μA
  • Low Dropout Operation: 100% Duty Cycle
  • Power Good Output
  • Phase Pin Selects 2nd Channel Phase Relationship with Respect to 1st Channel
  • Internal Soft-Start with Individual Run Pin Control
  • Available in Small Thermally Enhanced (5mm × 3mm) DFN and 20-Lead TSSOP Packages

Product Details

The LTC3417 is a dual constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.25V to 5.5V input voltage range and has a constant programmable switching frequency, allowing the use of tiny, low cost capacitors and inductors 2mm or less in height. Each output voltage is adjustable from 0.8V to 5V. Internal synchronous low RDS(ON) power switches provide high efficiency without the need for external Schottky diodes.

A user selectable mode input allows the user to trade off ripple voltage for light load efficiency. Burst Mode® operation provides high efficiency at light loads, while Pulse Skip mode provides low ripple noise at light loads. A phase mode pin allows the second channel to operate in-phase or 180° out-of-phase with respect to channel 1. Out-of-phase operation produces lower RMS current on VIN and thus lower RMS derating on the input capacitor.

To further maximize battery life, the P-channel MOSFETs are turned on continuously in dropout (100% duty cycle) and both channels draw a total quiescent current of only 100µA. In shutdown, the device draws <1µA.

 

 

Features Notes
LTC3417 - -
LTC3417A Improved Channel Matching -
LTC3417A-1 Power On Reset Recommended For New Designs
LTC3417A-2 Power Good Recommended For New Designs


Applications

  • PDAs/Palmtop PCs
  • Digital Cameras
  • Cellular Phones
  • PC Cards
  • Wireless and DSL Modems

Product Lifecycle icon-recommended Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Tools & Simulations

LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

To launch ready-to-run LTspice demonstration circuits for this part:

Step 1: Download and install LTspice on your computer.

Step 2: Click on the link in the section below to download a demonstration circuit.

Step 3: If LTspice does not automatically open after clicking the link below, you can instead run the simulation by right clicking on the link and selecting “Save Target As.” After saving the file to your computer, start LTspice and open the demonstration circuit by selecting ‘Open’ from the ‘File’ menu.

LTspice

Models for the following parts are available in LTspice:

LTC3417
LTC3417A
LTC3417A-1
LTC3417A-2

LTpowerCAD

LTpowerCAD® is a power supply design program which selects power stage components, provides detailed power efficiency, shows quick loop Bode plot stability and load transient analysis, and can export to LTspice for simulation.

To open the project file for this circuit:

Step 1: Download and install LTpowerCAD on your computer.

Step 2: Click on the link(s) in the section below to download part-specific project files.

Step 3: If the project file doesn't run, right-click the link and select "Save Target As." Then start the LTpowerCAD tool and open the project file by selecing "Open Project" from the "File" menu.

LTPowerCAD

Design tools for the following parts are available in LTpowerCAD:

LTC3417
LTC3417A
LTC3417A-2

Product Recommendations

LTC3417 Companion Parts

Recommended Related Parts

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

Discussions

LTC3417 Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Sample & Buy functionality exists in desktop site
Back
Check Inventory


The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help