Overview

Features and Benefits

  • Peak efficiency: 92%
  • Operating frequency: 6 MHz
  • Typical quiescent current in auto mode: 36 μA
  • Fixed output voltage: 1.8 V, 1.82 V, 1.85 V, 1.875 V, 2.3 V
  • Maximum guaranteed load current: 600 mA at VIN = 2.7 V to 5.5 V
  • Input voltage: 2.3 V to 5.5 V
  • Typical shutdown supply current: 0.3 μA
  • Automatic power-saving mode
  • Compatible with tiny multilayer inductors
  • Internal synchronous rectifier
  • Internal compensation
  • Internal soft start
  • Output to ground short-circuit protection
  • Cycle-by-cycle current-limit protection
  • Enable/shutdown logic input
  • Undervoltage lockout
  • Thermal shutdown protection
  • Ultrasmall 6-ball, 0.4 mm pitch, 1.17 mm2 WLCSP

Product Details

The ADP2121 is a high frequency, low quiescent current step-down dc-to-dc converter optimized for portable applications in which board area and battery life are critical constraints. The 6 MHz operating frequency enables the use of tiny ceramic inductors and capacitors. Additionally, the synchronous rectification improves efficiency and results in fewer external components.

At high load currents, the device uses a voltage regulating pulse-width modulation (PWM) mode that maintains a constant frequency with excellent stability and transient response. In forced PWM mode, the converter continues operating in PWM for light loads. At light load conditions in auto mode, the ADP2121 can automatically enter a power-saving mode that uses pulse-frequency modulation (PFM) to reduce the effective switching frequency and ensure the longest battery life in portable applications. During logic controlled shutdown (EN ≤ 0.4 V), the input is disconnected from the output and draws less than 0.3 μA current (typical) from the source.

The ADP2121 has an input voltage range of 2.3 V to 5.5 V (2.9 V to 5.5 V for VOUT = 2.3 V), allowing the use of a single Li+/Li− polymer cell, 3-cell alkaline or Ni-MH cell, and other standard power sources. The converter can source up to 600 mA and is internally compensated to minimize external components. Other key features, such as cycle-by-cycle peak current limit, soft start, undervoltage lockout (UVLO), output-to-ground short-circuit protection, and thermal shutdown, protect the internal and external circuit components.

Applications

  • Mobile phones
  • Digital cameras
  • Digital audio
  • Portable equipment

Product Lifecycle icon-recommended Last Time Buy

All products in this family will be obsolete soon. Please contact ADI Sales or Distributors to arrange for final purchases and read our Obsolescence Information to review the time periods for placing final orders and receiving final shipments.

Evaluation Kits (1)

Tools & Simulations

Design Tools

ADIsimPower™ Voltage Regulator Design Tool

ADIsimPower is the fastest and most accurate Power Management design tool. ADI's Design Center lets you design your power circuits in three easy steps.

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

Discussions

ADP2121 Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Sample & Buy functionality exists in desktop site
Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.