Alternative Parts

  • LT1610
    LT1610

    1.7MHz, Single Cell Micropower DC/DC Converter

Overview

Features and Benefits

  • 5V at 1A from a Single Li-Ion Cell
  • 5V at 800mA in SEPIC Mode from Four NiCd Cells
  • Fixed Frequency Operation: 600kHz
  • Boost Converter Outputs up to 34V
  • Starts into Heavy Loads
  • Automatic Burst Mode Operation at Light Load (LT1308A)
  • Continuous Switching at Light Loads (LT1308B)
  • Low VCESAT Switch: 300mV at 2A
  • Pin-for-Pin Upgrade Compatible with LT1308
  • Lower Quiescent Current in Shutdown: 1µA (Max)
  • Improved Accuracy Low-Battery Detector Reference: 200mV ±2%
  • Available in 8-Lead SO and 14-Lead TSSOP Packages

Product Details

The LT1308A/LT1308B are micropower, fixed frequency step-up DC/DC converters that operate over a 1V to 10V input voltage range. They are improved versions of the LT1308 and are recommended for use in new designs. The LT1308A features automatic shifting to power saving Burst Mode operation at light loads and consumes just 140µA at no load. The LT1308B features continuous switching at light loads and operates at a quiescent current of 2.5mA. Both devices consume less than 1µA in shutdown.

Low-battery detector accuracy is significantly tighter than the LT1308. The 200mV reference is specified at ±2% at room and ±3% over temperature. The shutdown pin enables the device when it is tied to a 1V or higher source and does need to be tied to VIN as on the LT1308. An internal VCC clamp results in improved transient response and the switch voltage rating has been increased to 36V, enabling higher output voltage applications.

The LT1308A/LT1308B are available in the 8-lead SO and the 14-lead TSSOP packages.

  Features
LT1308 Not Recommended For New Designs
LT1308A Improved Transient Response, Burst Mode
LT1308B Improved Transient Response, Burst Mode Disabled 

Applications

  • GSM/CDMA Phones
  • Digital Cameras
  • LCD Bias Supplies
  • Answer-Back Pagers
  • GPS Receivers
  • Battery Backup Supplies
  • Handheld Computers

Product Lifecycle icon-recommended Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Evaluation Kits (1)

Tools & Simulations

LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

To launch ready-to-run LTspice demonstration circuits for this part:

Step 1: Download and install LTspice on your computer.

Step 2: Click on the link in the section below to download a demonstration circuit.

Step 3: If LTspice does not automatically open after clicking the link below, you can instead run the simulation by right clicking on the link and selecting “Save Target As.” After saving the file to your computer, start LTspice and open the demonstration circuit by selecting ‘Open’ from the ‘File’ menu.

LTspice

Models for the following parts are available in LTspice:

LT1308A
LT1308B

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

Discussions

LT1308A Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Sample & Buy functionality exists in desktop site
Back
Check Inventory


The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help