Overview

Features and Benefits

  • VOUT = 1/2 VIN (Supply Splitter)
  • Adjustable and Symmetrical Sink/Source Current Limit up to 20A
  • ±0.65% Output Voltage Accuracy
  • Up to 97% Efficiency
  • No Sense Resistor Required
  • Ultrafast Transient Response
  • True Current Mode Control
  • 2% to 90% Duty Cycle at 200kHz
  • tON(MIN) ≤ 100ns
  • Stable with Ceramic COUT
  • Dual N-Channel MOSFET Synchronous Drive
  • Power Good Output Voltage Monitor
  • Wide VCC Range: 4V to 36V
  • Adjustable Switching Frequency up to 1.5MHz
  • Output Overvoltage Protection
  • Optional Short-Circuit Shutdown Timer
  • Available in a 16-Pin Narrow SSOP Package

Product Details

The LTC3717 is a synchronous step-down switching regulator controller for double data rate (DDR) and Quad Data Rate (QDR) memory termination. The controller uses a valley current control architecture to deliver very low duty cycles without requiring a sense resistor. Operating frequency is selected by an external resistor and is compensated for variations in VIN.

Forced continuous operation reduces noise and RF interference. Output voltage is internally set to half of VREF, which is user programmable.

Fault protection is provided by an output overvoltage comparator and optional short-circuit shutdown timer. Soft-start capability for supply sequencing is accomplished using an external timing capacitor. The regulator current limit level is symmetrical and user programmable. Wide supply range allows operation from 4V to 36V at the VCC input.

Von Pin Package
LTC3717 No SSOP-16
LTC3717-1 Yes QFN-32

Applications

  • Bus Termination: DDR and QDR Memory, SSTL, HSTL, ...
  • Notebook Computers, Desktop Servers
  • Tracking Power Supply

Product Lifecycle icon-recommended Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Evaluation Kits (1)

Tools & Simulations

LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

LTspice

Models for the following parts are available in LTspice:

LTC3717
LTC3717-1

Product Recommendations

LTC3717 Companion Parts

Recommended µModule Regulator

Recommended Related Parts

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

Discussions

LTC3717 Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Sample & Buy functionality exists in desktop site
Back
Check Inventory


The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.