High Accuracy over line and load: ±0.8% @ 25°C, ±1.8% over temperature
Ultralow dropout voltage: 230 mV (Max) @ 300 mA
Requires only COUT = 1.0 µF for stability
anyCAP is stable with any type of capacitor (including MLCC)
Current and thermal limiting
Low shutdown current: < 1 µA
2.6 V to 12 V supply range
–40°C to +85°C ambient temperature range
Ultrasmall 8-Lead MSOP package
The ADP3333 is a member of the ADP333x family of precision low dropout (LDO) anyCAP® voltage regulators. Pin compatible with the MAX8860, the ADP3333 operates with a wider input voltage range of 2.6 V to 12 V and delivers a load current up to 300 mA. ADP3333 stands out from other conventional LDOs with a novel architecture and an enhanced process that enables it to offer performance advantages over its competition. Its patented design requires only a 1.0 μF output capacitor for stability. This device is insensitive to output capacitor equivalent series resistance (ESR) and is stable with any good quality capacitor, including ceramic (MLCC) types for space-restricted applications. The ADP3333 achieves exceptional accuracy of ±0.8% at room temperature and ±1.8% over temperature, line, and load variations. The dropout voltage of the ADP3333 is only 140 mV (typical) at 300 mA. This device also includes a safety current limit, thermal overload protection, and a shutdown feature. In shutdown mode, the ground current is reduced to less than 1 μA. The ADP3333 has ultralow quiescent current 70 μA (typical) in light load situations.
This expert design tool produces custom DC-DC converter designs in about a minute. The user enters 5 inputs and chooses to optimize for efficiency, PCB space, cost, or part count. Output is a complete schematic, BOM, efficiency plot, and performance summary. A PDF summary and a blank PCB is offered for each design to facilitate fast prototyping to verify the design.
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
The model number is a specific version of a generic that can be purchased or sampled.
Status indicates the current lifecycle of the product. This can be one of 4 stages:
Pre-Release: The model has not been released to general production, but samples
may be available.
Production: The model is currently being produced, and generally available for purchase
Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased
for a limited time.
Obsolete: The specific part is obsolete and no longer available. Other models listed
in the table may still be available (if they have a status that is not obsolete).
The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered
to show the performance of the model, the part is included on the board.
For detailed drawings and chemical composition please consult our
Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams
& pin function descriptions may be found in the datasheet.
This is the acceptable operating range of the device. The various ranges specified
are as follows:
Commercial: 0 to +70 degrees Celsius
Military : -55 to +125 degrees Celsius
Industrial: Temperature ranges may vary by model. Please consult the datasheet for
Automotive: -40 to +125 degrees Celsius
Indicates the packing option of the model (Tube, Reel, Tray, etc.) and the standard
quantity in that packing option.
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars
(FOB USA per unit for the stated volume), and is subject to change. International
prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific
price or delivery quotes, please contact your local Analog Devices, Inc. sales office
or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based
on 1-piece pricing.
This is the date Analog Devices, Inc. anticipates that the product will ship from
the warehouse. Most orders ship within 48 hours of this date.Once an order has been
placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm
your delivery date. It is important to note the scheduled dock date on the order
entry screen. We do take orders for items that are not in stock, so delivery may
be scheduled at a future date. Also, please note the warehouse location for the
product ordered. We have warehouses in the United States, Europe and Southeast Asia.
Transit times from these sites may vary.
Sample availability may be better than production availability. Please enter samples
into your cart to check sample availability.
Due to environmental concerns, ADI offers many of our products in lead-free versions.
For more information about lead-free parts, please consult our
Pb (Lead) free information page.
This is the list of Product Change Notifications (PCN) and Product Discontinuance
Notifications (PDN) published on the web for this model. Click on the link to access
PCN/PDN information. Online PCNs are available starting in 2009 and online PDNs
are available starting in 2010. To obtain older PCNs or PDNs, contact your ADI Sales
Rep. For more information on ADI's PCN/PDN process, please visit our
PCN/PDN Information page.
The Purchase button will be displayed if model is available for purchase online
at Analog Devices or one of our authorized distributors. Select the purchase button
to display inventory availability and online purchase options.The Sample button
will be displayed if a model is available for web samples. If a model is not available
for web samples, look for notes on the product page that indicate how to request
samples or Contact ADI.