800 mA, Ultra Low Noise/High PSRR Adjustable Vout LDO

Manufactured by:

Product Details

The ADM7151 is a low dropout linear regulator that operates from 4.5 V to 16V and provides up to 800mA of output current. Using an advanced proprietary architecture, they provide high power supply rejection, low noise, and achieve excellent line and load transient response with a 10 μF ceramic output capacitor. The output voltage may be set to any voltage between 1.5V and 5.1V with two resistors.

The ADM7151 is available in 2 models that optimize power dissipation and PSRR performance as a function of input and output voltage.The ADM7151 regulator output noise is 1.0 μVrms (100Hz to 100KHz) and 1.7nV/√Hz noise spectral density above 10KHz.

The ADM7151 is available in 8-lead, 3 mm × 3 mm LFCSP and 8-lead SOIC packages, making it not only a very compact solution, but also providing excellent thermal performance for applications requiring up to 800mA of output current in a small, low-profile footprint.

ADM7151 is an adjustable Vout device. For fixed Vout version of the ADM7151, see the ADM7150.


  • Regulation to noise sensitive applications: RF Mixers, PLL’s, VCO’s, and PLL’s with Integrated VCO’s
  • Clock distribution circuits
  • Ultrasound and other imaging applications
  • High speed RF transceivers
  • High speed, 16 bit+ ADCs
  • Communications and Infrastructure

Product Lifecycle

icon-recommended Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits


X +


EVAL-ADM7150 Circuit Diagram

Product Details

The ADM7150CP-EVALZ and ADM7151CP-04-EVALZ evaluation boards are used to demonstrate the functionality of the ADM7150 and ADM7151 linear regulators, respectively.

Simple device measurements, such as line and load regulation, dropout, and ground current, can be demonstrated with just a single voltage source, a voltmeter, an ammeter, and load resistors.

For more details about the linear regulators, refer to the ADM7150 and ADM7151 data sheets.

Note:ADM7151 is adjustable and requires two resistors to set the output voltage

Tools & Simulations

X +

Design Tools

Design Resources

X +

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

ADM7151 Material Declaration
PCN-PDN Information Quality And Reliability Symbols and Footprints


Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Check Inventory

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

Price Table Help

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.