Quad, 16-Bit nanoDAC+ with 2 ppm/°C On-Chip Reference and I2C Interface
The AD5696R nanoDAC+TM is a quad, 16-bit, rail-to-rail, voltage output DAC. The device includes a 2.5V, 2ppm/˚C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5V (gain=1) or 5V (gain=2).
The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design and exhibits less than 0.1% FSR gain error and 1.5mV offset error performance. The device is available in a 3mm X 3mm LFCSP and a TSSOP package.
The AD5696R also incorporates a power-on-reset circuit and a RSTSEL pin that ensures the DAC outputs power up to zero-scale or midscale, and remain there until a valid write takes place. Each device contains a per-channel power-down feature that reduces the current consumption of the device to 4 uA at 3 V while in power-down mode.
The AD5696R employs an I2C interface that operates at clock rates up to 400 kHz and includes a VLOGIC pin intended for 1.8V/ 3V/ 5V logic.
- High Relative Accuracy: AD5696R (16-bit): ±2LSB INL max
- Low drift on-chip reference: 2.5V, 2ppm/°C temperature drift
- Tiny Package: 3mm × 3mm 16-lead LFCSP or 16-lead TSSOP
- Optical transceivers
- Base-station power amplifiers
- Process control (PLC I/O cards)
- Industrial Automation
- Data acquisition systems
Comparable Parts Click to see all in Parametric Search
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
The Evaluation board for the AD5696R contains a SDP connection and software allowing the AD5696R to be controlled from a SDP board.
The SDP Controller board is a separate list item in the ordering guide below (EVAL-SDP-CB1Z). If you have not previously purchased an SDP Controller board, please do so to ensure a full evaluation setup.
Modern DACs and DAC Buffers Improve System Performance, Simplify Design
By Padraic O'Reilly and Charly El-Khoury
(Analog Dialogue Vol. 46, March 2012)
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
Didn't find what you were looking for?
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.