Dual, 16-Bit, 1200 MSPS, TxDAC+® Digital-to-Analog Converter
The AD9122 is a dual 16-bit, high dynamic range, digital-to-analog converter (DAC) that provides a sample rate of 1200 MSPS, permitting a multicarrier generation up to the Nyquist frequency. It includes features optimized for direct conversion transmit applications, including complex digital modulation, and gain and offset compensation. The DAC outputs are optimized to interface seamlessly with analog quadrature modulators, such as the ADL537x F-MOD series from Analog Devices, Inc. A 4-wire serial port interface provides for programming/readback of many internal parameters. Full-scale output current can be programmed over a range of 8.7 mA to 31.7 mA. The AD9122 comes in a 72-lead LFCSP.
The AD9122-EP supports defense and aerospace applications (AQEC).
- Ultralow noise and intermodulation distortion (IMD) enable high quality synthesis of wideband signals from baseband to high intermediate frequencies.
- A proprietary DAC output switching technique enhances dynamic performance.
- The current outputs are easily configured for various single-ended or differential circuit topologies.
- Flexible LVDS digital interface allows the standard 32-wire bus to be reduced to ½ or ¼ of the width.
- Wireless infrastructure
- W-CDMA, CDMA2000, TD-SCDMA, WiMAX, GSM, LTE
- Digital high or low IF synthesis
- Transmit diversity
- Wideband communications: LMDS/MMDS, point-to-point
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.
The AD-FMCOMMS1-EBZ high-speed analog module is designed to showcase the latest generation high-speed data converters. The AD-FMCOMMS1-EBZ provides the analog front-end for a wide range of compute-intensive FPGA-based radio applications.
The AD-FMCOMMS1-EBZ is an analog front end hardware platform that addresses a broad range of research, academic, industrial and defense applications. The AD-FMCOMMS1-EBZ enables RF applications from 400MHz to 4 GHz. The module is customizable to a wide range of frequencies by software without any hardware changes, providing options for GPS or IEEE 1588 Synchronization, and MIMO configurations.
When combined with the Xilinx ZYNQ® Software-Defined Radio Kit, AD-FMCOMMS1-EBZ enables a variety of wireless communications functions at the physical layer, from baseband to RF. With up to 4 GB of flash storage space, 512 MB of RAM, Gigabit Ethernet interface (depending on the base platform) and a Linux image built specifically for the AD-FMCOMMS1-EBZ, you can get everything you need for a easy out of the box experience. The platform offers enough flexibility for many applications, and supports streaming data, and standard web interfaces to analyze transmitted RF data.
- Electronic test and measurement equipment
- General-purpose software radios
- Radar systems
- Ultra wideband satellite receivers
- Point to point communication systems
Recommended Quadrature Modulators
- For an IQ modulator with integrated PLL and VCO , we recommend the ADRF6701, ADRF6702, ADRF6703 or the ADRF6704 .
- For 3V power supplies , we recommend the AD8345, AD8346 or the AD8349 .
- In wideband communication systems , we recommend the ADL5370, ADL5371, ADL5372, ADL5373, ADL5374, ADL5375, ADL5385 or the ADL5386 .
Recommended Clock Drivers
Solutions Bulletins & Brochures
Digital to Analog Converters ICs Solutions Bulletin
Solutions Bulletins & Brochures
Digital-to-Analog Converter ICs Solutions Bulletin, Volume 10, Issue 1
Customer Case Studies
Analog Devices Retains Domination in Data Converters
Semiconductors Simplify Direct-Conversion Design
Advances in semiconductor processes have enabled integrated circuits with the performance needed for wireless...
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
- 3 week(s) ago in Speed DACs
- 25 week(s) ago in FPGA Reference Designs
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.