Alternative Parts

  • LTC6950
    LTC6950

    1.4GHz Low Phase Noise, Low Jitter PLL with Clock Distribution

Overview

Features and Benefits

  • Low Noise Clock Distribution: Suitable for High Speed/High Resolution ADC Clocking
  • Additive Jitter < 20fsRMS (12kHz to 20MHz)
  • Additive Jitter < 85fsRMS (10Hz to Nyquist)
  • 1.8GHz Maximum Input Frequency (LTC6954-1 When DELAY = 0)
  • 1.4GHz Maximum Input Frequency (LTC6954-1 When DELAY > 0, LTC6954-2, -3, -4)
  • EZSync Clock Synchronization Compatible
  • Three Independent, Low Noise Outputs
  • Four Output Combinations Available
  • Three Independent Programmable Dividers Covering All Integers From 1 to 63
  • Three Independent Programmable Delays Covering All Integers From 0 to 63
  • –40°C to 105°C Junction Temperature Range

Product Details

The LTC6954 is a family of very low phase noise clock distribution parts. Each part has three outputs and each output has an individually programmable frequency divider and delay. There are four members of the family, differing in their output logic signal type:

LTC6954-1: Three LVPECL outputs

LTC6954-2: Two LVPECL and one LVDS/CMOS outputs

LTC6954-3: One LVPECL and two LVDS/CMOS outputs

LTC6954-4: Three LVDS/CMOS outputs

Each output is individually programmable to divide the input frequency by any integer from 1 to 63, and to delay each output by 0 to 63 input clock cycles. The output duty cycle is always 50%, regardless of the divide number. The LVDS/CMOS outputs are jumper selectable via the OUTxSEL pins to provide either an LVDS logic output or a CMOS logic output.

The LTC6954 also features Linear Technology’s EZSync system for perfect clock synchronization and alignment every time.

All device settings are controlled through an SPI-compatible serial port.

Applications

  • Clocking High Speed, High Resolution ADCs, DACs and Data Acquisition Systems
  • Low Jitter Clock Distribution

Product Lifecycle icon-recommended Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits (4)

Software & Systems Requirements

Evaluation Software

LTC6954 GUI

LTC6954_GUI is used to communicate with the LTC6954 clock driver. It uses the DC590 to translate between USB and SPI-compatible serial communications formats.

Tools & Simulations

Linduino

Linduino is Analog Devices’ Arduino compatible system for developing and distributing firmware libraries and example code for our integrated circuits.

Linduino

Product Recommendations

LTC6954 Companion Parts

Recommended Related Parts

Recommended Suggested Oscillator

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

Discussions

LTC6954 Discussions

LTC6954 Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Sample & Buy functionality exists in desktop site
Back
Check Inventory


The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.