AD9877

Single Supply Cable Modem/Set Top Box Mixed Signal Front End (MxFE®)
Manufactured by:

Product Details

The AD9877 is a single supply Cable Modem/Set Top Box Mixed Signal Front End. The device contains a transmit path interpolation filter, a complete quadrature digital upconverter and transmit DAC. The receive path contains a 12-bit ADC and Dual 8-bit ADCs. All internally required clocks and an output system clock are generated by the PLL from a single crystal or clock input.

The transmit path interpolation filter provides upsampling factors of 12x or 16x with an output signal bandwidth as high as 8.4 MHz. The direct digital synthesizer (DDS) can generate carrier frequencies up to 65 MHz with 26 bits of frequency tuning resolution. The transmit DAC resolution is 12 bits and can run at sampling rates as high as 232 MSPS. Analog output scaling from 0 to 7.5 dB in 0.5 dB steps is available to preserve transmit path SNR when reduced output levels are required.

The 12-bit ADC has excellent undersampling performance allowing it to deliver better than 10 ENOBs with IF inputs up to 75 MHz. The 12-bit IF ADC has a sampling rate of up to 33MHz, allowing it to process wideband signal inputs.

Two programmable sigma delta DACs are available which can be used to control external components such as variable gain amplifiers (VGAs) or voltage-controlled tuners.

The AD9877 integrates a CA port that enables a host processor to control the AD8321/AD8323 or AD8322/AD8327 programmable gain amplifier (PGA) cable drivers through the MxFE SPORT.

The AD9877 is available in a 100-pin MQFP package. It offers enhanced receive path undersampling performance and lower cost, compared with the pin compatible AD9873. The AD9877 is specified over the extended industrial (-40ºC to +85°C) temperature range.

Product Lifecycle

checked Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Reference Materials

X +

Design Resources

X +

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

AD9877 Material Declaration
PCN-PDN Information Quality And Reliability Symbols and Footprints

Discussions

X+

AD9877 Discussions

Didn't find what you were looking for?

Sample & Buy

X+
Back
Check Inventory

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help