Low Cost, Complete 12-Bit Resolver-to-Digital Converter
The AD2S90 is a complete 12-bit resolution tracking resolver-to- digital converter. No external components are required to operate the device.
The converter accepts 2 V rms ± 10% input signals in the range 3 kHz-20 kHz on the SIN, COS and REF inputs. A Type II servo loop is employed to track the inputs and convert the input SIN and COS information into a digital representation of the input angle. The bandwidth of the converter is set internally at 1 kHz. The maximum tracking rate is 375 rps at 12-bit resolution.
Angular position output information is available in two forms, absolute serial binary and incremental A quad B.
The absolute serial binary output is 12-bit (1 in 4096). The data output pin is high impedance when Chip Select CS is logic HI. This allows the connection of multiple converters onto a common bus. Absolute angular information in serial pure binary form is accessed by CS followed by the application of an external clock (SCLK) with a maximum rate of 2 MHz.
The encoder emulation outputs A, B and NM continuously produce signals equivalent to a 1024 line encoder.
When decoded this corresponds to 12-bits resolution. Three common north marker pulse widths are selected via a single pin (NMC).
An analog velocity output signal provides a representation of velocity from a rotating resolver shaft traveling in either a clockwise or counterclockwise direction.
The AD2S90 operates on a ±5 V dc ± 5% power supplies and is fabricated on Analog Devices' Linear Compatible CMOS process (LC2MOS). LC2MOS is a mixed technology process that combines precision bipolar circuits with low power CMOS logic circuits.
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.
(Analog Dialogue, Vol. 30, No. 2, 1996)
Complementary Part Guides
Resolver to Digital Converter Component Part Guide
This is a DOS utility that will run and guide you through the selection of ancillary components that are used with...
Single Chip DSP Motor Control Systems Catching on in Home Appliances
An article by David Krakauer of Analog Devices, reprinted from the October 2000 issue of Appliance Magazine. This...
DSP Motor Control in Domestic Appliance Applications
An article by Dr. Aengus Murray of Analog Devices printed in ECN Magazine, May 2000 issue. The article addresses...
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
Didn't find what you were looking for?
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.