Alternative Parts

  • LTC6412
    LTC6412

    800MHz, 31dB Range Analog-Controlled VGA

  • LTC6430-20
    LTC6430-20

    High Linearity Differential RF/IF Amplifier/ADC Driver

Overview

Features and Benefits

  • Output IP3 at 100MHz: 47dBm
  • Maximum Output Power: 21dBm
  • Bandwidth: LF to 850MHz
  • Propagation Delay: 0.8ns
  • Maximum Gain: 33dB
  • Noise Figure: 7.3dB (Max Gain)
  • Gain Control Range: 22.5dB
  • Gain Control Step: 1.5dB
  • Gain Control Settling Time: 500ns
  • Output Noise Floor: –134dBm/Hz (Max Gain)
  • Reverse Isolation: –80dB
  • Single Supply: 4.75V to 5.25V
  • Low Power Mode
  • Shutdown Mode
  • Enable/Disable Time: 1µs
  • Differential I/O Interface
  • 20-Lead TSSOP Package

Product Details

The LT5514 is a programmable gain amplifier (PGA) with bandwidth extending from low frequency (LF) to 850MHz. It consists of a digitally controlled variable attenuator, followed by a high linearity amplifier. The amplifier is configured with two identical transconductance amplifiers, hard wired in parallel with individual dedicated enable pins. When both amplifiers are enabled (Standard mode), the LT5514 offers an OIP3 of +47dBm (at 100MHz). Power dissipation can be reduced when a single amplifier is enabled (Low Power mode). Four parallel digital inputs control the gain over a 22.5dB range with 1.5dB step resolution. An on-chip power supply regulator/filter helps isolate the amplifier signal path from external noise sources.

The LT5514’s open-loop architecture offers stable operation for any practical load conditions, including peaking-free AC response when driving capacitive loads, and excellent reverse isolation.

The LT5514 may be operated broadband, where the output differential RC time constant sets the bandwidth, or it may be used as a narrowband driver with the appropriate output filter.

Applications

  • High Linearity ADC Driver
  • IF Sampling Receivers
  • VGA IF Power Amplifier
  • 50Ω Driver
  • Instrumentation Applications

Product Lifecycle icon-recommended Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Evaluation Kits (1)

Product Recommendations

LT5514 Companion Parts

Recommended Related Parts

Reference Materials

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

Discussions

LT5514 Discussions

RF input power for LT5560 mixer
11 week(s) ago in RF and Microwave
LT5514 Didn't find what you were looking for? Ask the Analog community »

Sample & Buy

Sample & Buy functionality exists in desktop site
Back
Check Inventory


The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 

Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.