Features and Benefits
- Next generation of the AD820/AD822
- Wide gain bandwidth product: 8 MHz typical
- High slew rate: +23 V/μs/−18 V/μs typical
- Low input bias current: ±10 pA maximum at TA = 25°C
- Low offset voltage
- A grade: ±0.8 mV maximum at TA = 25°C
- B grade: ±0.35 mV maximum at TA = 25°C
- Low offset voltage drift
- A grade: ±2 μV/°C typical, ±15 μV/°C maximum
- B grade: ±2 μV/°C typical, ±5 μV/°C maximum
- Input voltage range includes Pin V−
- Rail-to-rail output
- Electromagnetic interference rejection ratio (EMIRR)
- 90 dB typical at f = 1000 MHz and f = 2400 MHz
- Industry-standard package and pinouts
The ADA4622-1/ADA4622-2 are the next generation of the AD820 and the AD822 single-supply, rail-to-rail output (RRO), precision junction field effect transistors (JFET) input op amps. The ADA4622-1/ADA4622-2 include many improvements that make them desirable as an upgrade without compromising the flexibility and ease of use that makes the AD820 and the AD822 useful for a wide variety of applications.
The input voltage range includes the negative supply and the output swings rail-to-rail. Input EMI filters increase the signal robustness in the face of closely located switching noise sources.
The speed, in terms of bandwidth and slew rate, increases along with a strong output drive to improve settling time performance and enable the devices to drive the inputs of modern single-ended, successive approximation register (SAR) analog-to-digital converters (ADCs).
Voltage noise is reduced; while keeping the supply current the same as the AD820 and the AD822, broadband noise is reduced by 25%, and 1/f is reduced by half. DC precision in the ADA4622-1/ADA4622-2 improved from the AD820 and the AD822 with half the offset and a maximum thermal drift specification added to the ADA4622-1/ADA4622-2. The common-mode rejection ratio (CMRR) is improved from the AD820 and the AD822 to make the ADA4622-1/ADA4622-2 more suitable when used in noninverting gain and difference amplifier configurations.
The ADA4622-1/ADA4622-2 are specified for operation over the extended industrial temperature range of −40°C to +125°C and operates from 5 V to 30 V with specifications at +5 V, ±5 V, and ±15 V. The ADA4622-1 is available in a 5-lead SOT-23 package and an 8-lead LFCSP package, and the ADA4622-2 is available in an 8-lead SOIC package, an 8-lead MSOP package, and an 8-lead LFCSP package.
- High output impedance sensor interfaces
- Photodiode sensor interfaces
- Transimpedance amplifiers
- ADC drivers
- Precision filters and signal conditioning
Markets & Technology
- Instrumentation & Measurement
Product Lifecycle Recommended for New Designs
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
Evaluation Kits (1)
The Universal Precision Op Amp Evaluation Boards have been designed and optimized for many circuit configurations allowing the users to best suit their applications. These boards are all RoHs Compliant. See references below on what board to order by lead count and package.
- EVAL-PRAOPAMP-1KSZ (Single 5-Lead SC70) KS-5
- EVAL-PRAOPAMP-1RJZ (Single 5-Lead SOT 23) RJ-5
- EVAL-PRAOPAMP-1RMZ (Single 8-Lead MSOP) RM-8
- EVAL-PRAOPAMP-1RZ (Single 8-Lead SOIC) R-8
Tools & Simulations
LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.
Models for the following parts are available in LTspice:
Use Photodiode Wizard to design a transimpedance amplifier circuit to interface with a photodiode. Select a photodiode from the library included in the tool, or enter custom photodiode specifications. Quickly observe tradeoffs between Bandwidth, Peaking (Q), and ENOB/SNR. Modify circuit parameters, and immediately see results in plots for pulse response, frequency response, and noise gain.
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
Sample & Buy
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.