The AD8666/AD8668 are single supply, rail-to-rail output amplifiers with low noise performance featuring an extended operating range with supply voltages up to 16 V. They also feature low input bias currents, wide signal bandwidth, and low input voltage and current noise. For lower offset voltage, choose the AD8662(dual).

The combination of offsets, very low input bias currents, and wide supply range make these amplifiers useful in a wide variety of cost-sensitive applications normally associated with much higher priced JFET amplifiers. Systems utilizing high impedance sensors, such as photo diodes, benefit from the combination of low input bias current, low noise, and low offset and bandwidth. The wide operating voltage range matches today’s high performance ADCs and DACs. Audio applications and medical monitoring equipment can take advantage of the high input impedance, low voltage and current noise, wide bandwidth, and the lack of “popcorn” noise found in many other low input bias current amplifiers.

The AD8666/AD8668 are specified over the extended industrial temperature range (−40° to +125°C).

Applications

Sensor Amplification

Reference Buffers

Medical Equipment

Physiological Measurements

Signal Filters and Conditioning

Consumer Audio

Photodiode Amplification

ADC Driver

Level Shifting Circuits

Part#	Small Signal Bandwidth	Slew Rate	Vos	Ib	V Noise Density	Amplifiers Per Package	Widest Temp Range (°C)
AD8666	4MHz	3.5V/µs	600µV	200fA	10nV/rtHz	2	-40 to +125
AD8692	10MHz	5V/µs	400µV	200fA	8nV/rtHz	2	-40 to +125
AD8606	10MHz	5V/µs	20µV	200fA	6.5nV/rtHz	2	-40 to +125
AD8616	24MHz	12V/µs	23µV	200fA	6nV/rtHz	2	-40 to +125
AD8665	4MHz	3.5V/µs	600µV	200fA	10nV/rtHz	1	-40 to +125
AD8668	4MHz	3.5V/µs	600µV	200fA	10nV/rtHz	4	-40 to +125
OP284	4.25MHz	4V/µs	175µV	80nA	3.9nV/rtHz	2	-40 to +125
AD8602	8.4MHz	6V/µs	500µV	200fA	18nV/rtHz	2	-40 to +125
AD8605	10MHz	5V/µs	20µV	200fA	6.5nV/rtHz	1	-40 to +125
AD8691	10MHz	5V/µs	400µV	200fA	6.5nV/rtHz	1	-40 to +125
AD8694	10MHz	5V/µs	400µV	200fA	8nV/rtHz	4	-40 to +125

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.