The AD8613/AD8617/AD8619 are single/dual/quad micropower rail-to-rail input and output amplifier that features low offset voltage as well as low input voltage and current noise. The part is fully specified to operate from 1.8 V to 5.0 V single supply, or ±0.9 V and ±2.5 V dual supply. The combination of low offsets, low noise, very low input bias currents, and low power consumption make the AD8617 especially useful in portable and loop-powered instrumentation. The ability to swing rail-to-rail at both the input and output enables designers to buffer CMOS ADCs, DACs, ASICs, and other wide output swing devices in low power single-supply systems.

Part#	Small Signal Bandwidth	Slew Rate	Vos	Ib	V Noise Density	Amplifiers Per Package	Widest Temp Range (°C)
AD8617	400KHz	100mV/µs	400µV	200fA	22nV/rtHz	2	-40 to +125
AD8607	400KHz	100mV/µs	12µV	200fA	22nV/rtHz	2	-40 to +125
AD8692	10MHz	5V/µs	400µV	200fA	8nV/rtHz	2	-40 to +125
AD8606	10MHz	5V/µs	20µV	200fA	6.5nV/rtHz	2	-40 to +125
AD8616	24MHz	12V/µs	23µV	200fA	6nV/rtHz	2	-40 to +125
AD8609	400KHz	100mV/µs	12µV	200fA	22nV/rtHz	4	-40 to +125
AD8603	400KHz	100mV/µs	12µV	200fA	22nV/rtHz	1	-40 to +125
AD8619	400KHz	100mV/µs	400µV	200fA	22nV/rtHz	4	-40 to +125
AD8667	520KHz	260mV/µs	30µV	300fA	21nV/rtHz	2	-40 to +125
OP2177	1.3MHz	700mV/µs	15µV	500pA	7.9nV/rtHz	2	-40 to +125
AD8629	2.5MHz	1V/µs	1µV	30pA	22nV/rtHz	2	-40 to +125

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.