AD8607: Precision Dual MicroPower Rail-to-Rail Input/Output Amplifier
The AD8603/AD8607/AD8609 are single/dual/quad micro-power rail-to-rail input and output amplifiers, respectively, that feature very low offset voltage as well as low input voltage and current ...More
Technical Article: Home Glucose Monitoring Systems Using Amperometry
AD8607: Precision Dual MicroPower Rail-to-Rail Input/Output Amplifier
Product Description
The AD8603/AD8607/AD8609 are single/dual/quad micro-power rail-to-rail input and output amplifiers, respectively, that feature very low offset voltage as well as low input voltage and current noise.
These amplifiers use a patented trimming technique that achieves superior precision without laser trimming. The parts are fully specified to operate from 1.8 V to 5.0 V single supply or from ±0.9 V to ±2.5 V dual supply. The combination of low offsets, low noise, very low input bias currents, and low power consumption makes the AD8603/AD8607/AD8609 especially useful in portable and loop-powered instrumentation.
The ability to swing rail to rail at both the input and output enables designers to buffer CMOS ADCs, DACs, ASICs, and other wide output swing devices in low power, single-supply systems.
The AD8603 is available in a tiny 5-lead TSOT package. The AD8607 is available in 8-lead MSOP and 8-lead SOIC packages. The AD8609 is available in 14-lead TSSOP and 14-lead SOIC packages.
Applications
Data Sheet, Rev. C, 6/08
- Data Sheet Rev C, 06/2008 (pdf 451kB)
- (About Data Sheets)
Features
- Low Offset Voltage: 40 µV typ
- Low Input Bias Current: 1pA max
- Single-Supply Operation: 1.8 to 5 Volts
- Low Noise: 25 nV/vHz
- Micropower: 50 µA/Amp max
- No Phase Reversal
- Unity Gain Stable
Diagrams
- Enlarge
- Symbols and Footprints
Pin Configuration Diagram for AD8607
Precision Dual MicroPower Rail-to-Rail Input/Output Amplifier
Pin Configuration Diagram for AD8607
ADA4817-2 - Low Noise, 1 GHz FastFET Op Amps
AD8597 - Single, Ultralow Distortion, Ultralow Noise Op Amp
ADA4855-3 - Single Supply, High Speed, Rail-to-Rail Output, Triple Op Amp
ADA4858-3 - Single-Supply, High Speed, Triple Op Amp with Charge Pump
| Part# | Small Signal Bandwidth | Slew Rate | Vos | Ib | V Noise Density | Amplifiers Per Package | Widest Temp Range (°C) |
|---|---|---|---|---|---|---|---|
| AD8607 | 400KHz | 100mV/µs | 12µV | 200fA | 22nV/rtHz | 2 | -40 to +125 |
| AD8609 | 400KHz | 100mV/µs | 12µV | 200fA | 22nV/rtHz | 4 | -40 to +125 |
| AD8603 | 400KHz | 100mV/µs | 12µV | 200fA | 22nV/rtHz | 1 | -40 to +125 |
| AD8629 | 2.5MHz | 1V/µs | 1µV | 30pA | 22nV/rtHz | 2 | -40 to +125 |
| AD8617 | 400KHz | 100mV/µs | 400µV | 200fA | 22nV/rtHz | 2 | -40 to +125 |
| AD8676 | 10MHz | 2.5V/µs | 12µV | 500pA | 2.8nV/rtHz | 2 | -40 to +125 |
| AD8599 | 10MHz | 16.8V/µs | 10µV | 25nA | 1.15nV/rtHz | 2 | -40 to +125 |
