The AD8601/AD8602/AD8604 are Analog Devices' first DigiTrim™ amplifiers. Featuring a patented in-package trimming technique, these amplifiers combine rail-to-rail inputs and outputs; low offset voltage of 300 µV maximum over the entire common mode range and a wide 8 MHz bandwidth at less than 1 mA per amplifier. Intended for high volume single supply applications, they have about 1/10 the offset voltage of standard CMOS amplifiers for about the same price.

Part#	Small Signal Bandwidth	Slew Rate	Vos	Ib	V Noise Density	Amplifiers Per Package	Widest Temp Range (°C)
AD8602	8.4MHz	6V/µs	500µV	200fA	18nV/rtHz	2	-40 to +125
AD8616	24MHz	12V/µs	23µV	200fA	6nV/rtHz	2	-40 to +125
AD8604	8.4MHz	6V/µs	500µV	200fA	18nV/rtHz	4	-40 to +125
AD8601	8.4MHz	6V/µs	500µV	200fA	18nV/rtHz	1	-40 to +125
AD8599	10MHz	16.8V/µs	10µV	25nA	1.15nV/rtHz	2	-40 to +125
ADA4000-2	5MHz	20V/µs	200µV	5pA	16nV/rtHz	2	-40 to +125
OP262	15MHz	13V/µs	25µV	260nA	9.5nV/rtHz	2	-40 to +125
AD8615	23MHz	12V/µs	80µV	200fA	7nV/rtHz	1	-40 to +125
AD8618	24MHz	12V/µs	23µV	200fA	6nV/rtHz	4	-40 to +125
AD8620	25MHz	50V/µs	85µV	2pA	6nV/rtHz	2	-40 to +125
AD8656	28MHz	11V/µs	50µV	10pA	4nV/rtHz	2	-40 to +125

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.