The AD9954 is a direct digital synthesizer (DDS) that uses advanced technology, coupled with an internal high speed, high performance DAC to form a complete, digitally programmable, high frequency synthesizer capable of generating a frequency-agile analog output sinusoidal waveform at up to 160 MHz. The AD9954 enables fast frequency hopping coupled with fine tuning of both frequency (0.01 Hz or better) and phase (0.022° granularity).

The AD9954 is programmed via a high speed serial I/O port. The device includes static RAM to support flexible frequency sweep capability in several modes, plus a user-defined linear sweep mode of operation. Also included is an on-chip high speed comparator for applications requiring a square wave output. An on-chip oscillator and PLL circuitry provide users with multiple approaches to generate the device’s system clock.

The AD9954 is specified to operate over the extended industrial temperature range.

Applications

Agile LO frequency synthesis

Programmable clock generators

FM chirp source for radar and scanning systems

Automotive radars

Test and measurement equipment

Acousto-optic device drivers

Data Sheet, Rev. A, 1/07

Part#	Master fclk	Resolution (Bits)	Tuning Word Width (bits)	Nominal Supply (V)	I Supply total (max)	FS Iout (mA nom)	Compliance Range (V)	REFCLK Multiplier	On-Board Comparator	I/O Interface	Price* (1000-4999)	Product Description
AD9913	250MHz	10	32	Single(+1.8)	63.5mA	4.6	0.8	Yes	No	Parallel, Serial	$9.65	Low power 250 MSPS DDS with 10 bit DAC output
AD9833	25MHz	10	28	Single(+2.3 to +5.5), Single(+2.5), Single(+2.7), Single(+3), Single(+3.3), Single(+3.6), Single(+5)	5.5mA	3	0.65	No	No	Serial	$3.95	25 MHz, Serial Input, Programmable DDS Waveform Generator
AD9831	25MHz	10	32	Single(+3.3), Single(+3.6), Single(+5)	15mA	4	1.5	No	No	Parallel	$6.25	CMOS, 25 MHz Parallel Input DDS with On-Chip 10-Bit DAC & Sine Lookup Table
AD9832	25MHz	10	32	Single(+3.3), Single(+3.6), Single(+5)	15mA	4	1.35	No	No	Serial	$5.00	CMOS, 25 MHz Serial Input DDS with On-Chip 10-Bit DAC & Sine Lookup Table
AD5930	50MHz	10	24	Single(+2.3 to +5.5)	8mA	3.1	0.8	No	No	Serial	$6.30	Programmable Frequency Sweep and Output Burst Waveform Generator
AD5932	50MHz	10	24	Single(+2.3 to +5.5)	8mA	n/a	n/a	Yes	No	Serial	$4.10	Programmable Single-Scan Waveform Generator
AD9830	50MHz	10	32	Single(+5)	60mA	20	1	No	No	Parallel	$10.95	CMOS, 50 MHz Parallel Load DDS with On-Chip 10-Bit DAC & Sine Lookup Table
AD9835	50MHz	10	32	Single(+5)	40mA	4	1.35	No	No	Serial	$5.75	CMOS, Serial Input, 50 MHz DDS with On-Chip 10-Bit DAC
AD9834	75MHz	10	28	Single(+2.3 to +5.5), Single(+2.5), Single(+2.7), Single(+3), Single(+3.3), Single(+3.6), Single(+5)	8.7mA	3	0.8	No	Yes	Serial	$4.95	Low Power, 50 MHz Serial Input DDS With On-Board Comparator
AD9850	125MHz	10	32	Single(+3.3), Single(+5)	96mA	20	1.5	No	Yes	Parallel, Serial	$12.00	CMOS, 125 MHz Serial/Byte-Parallel Input, Complete DDS
AD9851	180MHz	10	32	Single(+3), Single(+3.3), Single(+3.6), Single(+5)	130mA	20	1.5	Yes	Yes	Parallel, Serial	$13.40	180 MHz Complete DDS
AD9852	300MHz	12	48	Single(+3.3)	922mA	20	1	Yes	Yes	Parallel, Serial	$15.40	CMOS, 300 MSPS Complete DDS w/ Clock Multiplier
AD9854	300MHz	12	48	Single(+3.3)	1210mA	10	1	Yes	Yes	Parallel, Serial	$16.90	CMOS 300 MHz, Quadrature, Complete-DDS
AD9859	400MHz	10	32	Multi(+1.8, +3.3)	n/a	20	2.05	Yes	No	Serial	$9.75	400 MSPS, 10-Bit, 1.8 V CMOS DDS
AD9951	400MHz	14	32	Multi(+1.8, +3.3), Single(+1.8)	n/a	10	2.05	Yes	No	Serial	$13.74	400 MSPS 14-Bit, 1.8 V CMOS DDS
AD9952	400MHz	14	32	Multi(+1.8, +3.3), Single(+1.8)	n/a	10	2.05	Yes	Yes	Serial	$15.49	400 MSPS, 14-Bit, 1.8 V, CMOS Direct Digital Synthesizer w/High Speed Comparator
AD9953	400MHz	14	32	Multi(+1.8, +3.3), Single(+1.8)	n/a	10	2.05	Yes	No	Serial	$14.74	400 MSPS, 14-Bit DAC, 1.8 V CMOS Direct Digital Synthesizer w/ 1024x32 RAM
AD9954	400MHz	14	32	Multi(+1.8, +3.3), Single(+1.8)	n/a	10	2.05	Yes	Yes	Serial	$17.24	400 MSPS, 14-Bit, 1.8V CMOS DDS w/ 1024x32 RAM, Linear Sweep Block, & Hi Speed Comparator
AD9956	400MHz	14	48	Multi(+1.8, +3.3)	n/a	10	2.3	No	No	Serial	$17.24	400 MSPS, 14-Bit DAC, 48-Bit Freq Tuning Word, 1.8 V CMOS DDS Based AgileRF™ Synthesizer
AD9958	500MHz	10	32	Multi(+1.8, +3.3)	105mA	10	2.3	Yes	-	Serial	$20.24	2-Channel 500 MSPS DDS with 10-Bit DACs
AD9911	500MHz	10	32	Single(+1.8)	73mA	10	1.8	Yes	-	Serial	$15.50	500 MSPS Direct Digital Synthesizer w/10-Bit DAC
AD9959	500MHz	10	32	Multi(+1.8, +3.3)	180mA	10	2.3	Yes	-	Serial	$37.14	-
AD9858	1000MHz	10	32	Multi(+3.3, +5)	n/a	40	3.8	No	No	Parallel, Serial	$45.12	1 GSPS Direct Digital Synthesizer
AD9910	1000MHz	14	32	Single(+1.8), Single(+3.3)	n/a	20	0.5	Yes	No	Parallel, Serial	$34.91	1 GSPS, 14-Bit, 3.3 V CMOS Direct Digital Synthesizer
AD9912	1000MHz	14	48	Multi(+1.8, +3.3)	394mA	-	0.5	Yes	Yes	Serial	$37.25	1 GSPS 14-Bit, DDS with Spur Reduction Channels

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.