The AD9865 is a mixed-signal front end (MxFE®) IC for transceiver applications requiring Tx and Rx path functionality with data rates up to 80 MSPS. Its flexible digital interface, power saving modes, and high Tx-to-Rx isolation make it well suited for half- and full-duplex applications. The digital interface is extremely flexible allowing simple interfaces to digital back ends that support half- or full-duplex data transfers, thus often allowing the AD9865 to replace discrete ADC and DAC solutions. Power saving modes include the ability to reduce power consumption of individual functional blocks or to power down unused blocks in half-duplex applications. A serial port interface (SPI) allows software programming of the various functional blocks. An on-chip PLL clock multiplier and synthesizer provide all the required internal clocks, as well as two external clocks from a single crystal or clock source.

The Tx signal path consists of a bypassable 2×/4× low-pass interpolation filter, a 10-bit TxDAC®, and a line driver. The transmit path signal bandwidth can be as high as 34 MHz at an input data rate of 80 MSPS. The TxDAC provides differential current outputs that can be steered directly to an external load or to an internal low distortion current amplifier. The current amplifier (IAMP) can be configured as a current or voltage mode line driver (with two external npn transistors) capable of delivering in excess of 23 dBm peak signal power. Tx power can be digitally controlled over a 19.5 dB range in 0.5 dB steps.

The receive path consists of a programmable amplifier (RxPGA), a tunable low pass filter (LPF), and a 10-bit ADC. The low noise RxPGA has a programmable gain range of −12 dB to +48 dB in 1 dB steps. Its input referred noise is less than 3.0 nV/ rtHz for gain settings beyond 36 dB. The receive path LPF cut-off frequency can either be set over a 15 MHz to 35 MHz range or simply bypassed. The 10-bit ADC achieves excellent dynamic performance over a 5 MSPS to 80 MSPS span. Both the RxPGA and the ADC offer scalable power consumption allowing power/performance optimization.

The AD9865 provides a highly integrated solution for many broadband modems. It is available in a space-saving 64-pin chip scale package and is specified over the commercial (−40°C to +85°C) temperature range.

Part#	RxTx Function	Channel BW MHz	IF or RF Range MHz	Primary Application	Supply V	Product Description	Price* (1000-4999)	Resolution (Bits)	# Chan	T-Put Rate
AD9868	Bband CODEC	-	-	Broadband Wireline, Home Networking	Multi(+3.3Anlg, +3.3Dig)	10-Bit DAC/80 MSPS, 10-Bit ADC, Mixed-Signal Front-End for Broadband Modem Applications	-	10	1	80MSPS
AD9865	Bband CODEC	35	DC-40	Broadband Wireline, Home Networking	Single(+3.3)	10-Bit DAC/80 MSPS, 10-Bit ADC, Mixed-Signal Front-End for Broadband Modem Applications	$9.95	10	1	80MSPS
AD9869	Bband CODEC	54	DC-40	Broadband Wireline, Home Networking	Multi(+3.3Anlg, +3.3Dig), Single(+3.3)	12-Bit DAC/80 MSPS, 12-Bit ADC, Mixed-Signal Front-End for Broadband Modem Applications	$18.05	12	1	80MSPS
AD9866	Bband CODEC	35	DC-40	Broadband Wireline, Home Networking	Single(+3.3)	12-Bit DAC/80 MSPS 12-Bit ADC, Mixed-Signal Front-End for Broadband Modem Applications	$18.55	12	1	80MSPS
AD9863	Bband Quadrature CODEC	25/40	DC-40	Broadband Wireless	Single(+3), Single(+3.3)	Dual, 12-Bit DAC/12-Bit 50/80 MSPS ADC, Mixed-Signal Front-End Processor (MxFE™) For Bband Apps	$21.42	12	2	50MSPS
AD9861-50	Bband Quadrature CODEC	25	DC-40	Broadband Wireless	Single(+3), Single(+3.3)	Dual 10-Bit DAC/Dual 50 MSPS ADC Mixed-Signal Front-End (MxFE™) For Broadband Comms Apps	$10.71	10	2	50MSPS
AD9861-80	Bband Quadrature CODEC	40	DC-40	Broadband Wireless	Single(+3), Single(+3.3)	Dual 10-Bit DAC/Dual 80 MSPS ADC Mixed-Signal Front-End (MxFE™) For Broadband Comms Apps	$10.71	10	2	80MSPS
AD9862	Bband Quadrature CODEC	32	DC-100	Broadband Wireless	Single(+3.3)	Dual 14-Bit DAC/Dual 12-Bit ADC Mixed Sig Front-End (MxFE™) for Bband Comms, Rx&Tx PGA, Digital SSB	$29.75	12	2	64MSPS
AD9860	Bband Quadrature CODEC	32	DC-100	Broadband Wireless	Single(+3.3)	Dual 12-Bit DAC/Dual 10-Bit ADC Mixed Sig Front-End (MxFE™) for Bband Comms, Rx&Tx PGA, Digital SSB	$13.74	10	2	64MSPS
AD6600	IF-to-Bits Rx Subsys	5 to 10	70-250	Wireless Infrastructure	Multi(+3.3, +5), Single(+5)	11-Bit, 1-Channel 20MSPS, or 2-Channel 10 MSPS Gain-Ranging ADC with RSSI	$38.50	11	2	20MSPS
AD9864	IF-to-Bits Rx Subsys	0.007 to 0.270	10-300	Narrowband Radio, Portable & Mobile Radio	Single(+3), Single(+3.3)	24-Bit Bandpass Sigma-Delta ADC/IF Digitizing Subsystem	$9.95	24	1	375kSPS
AD9874	IF-to-Bits Rx Subsys	0.007 to 0.270	10-300	Narrowband Radio, Portable & Mobile Radio	Single(+3), Single(+3.3)	24-Bit Bandpass Sigma-Delta ADC IF Digitizing Subsystem	$14.96	24	1	541.5kSPS
AD6650	IF-to-Bits Rx Subsys	3.5	70-300	Wireless Infrastructure	Single(+3), Single(+3.3)	16/24-Bit, 1 MSPS, Diversity IF-to-Baseband GSM/EDGE Narrowband Receiver	$20.40	24	2	1MSPS
AD9969	Multi-Chan Bband CODEC	8	DC-70	Cable Modem/Set Top Box	Single(+3.3)	3.3 V CMOS MxFE™ Mixed Signal Front End for broadband Set Top Box And Cable Modem applications	$14.25	12	3	29MSPS
AD9878	Multi-Chan Bband CODEC	8	DC-70	Cable Modem/Set Top Box	Single(+3.3)	Dual 12-Bit, 29 MSPS Direct IF ADC/12-Bit Direct IF DAC, Mixed-Signal Front-End for Broadband Apps	$13.52	12	4	29MSPS
AD9879	Multi-Chan Bband CODEC	8	DC-70	Cable Modem/Set Top Box	Single(+3.3)	12-Bit Mixed-Signal Front-End for Set Top Box & Cable Modem Applications	$11.98	12	5	29MSPS

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.