The AD9861 is a member of the MxFE® family, a group of integrated converters for the communications market. The AD9861 includes dual 10-bit Analog-to-Digital Converters (ADCs) and dual 10-bit Digital-to-Analog Converters (TxDAC® converters). Two speed grades are available, a -50 and -80. The -50 is optimized for ADC sampling of 50 MSPS and less, while the -80 is optimized for ADC sample rates between 50 MSPS and 80 MSPS. The dual TxDAC converters operate at speeds up to 200 MHz and includes a bypassable 2x or 4x interpolation filter. Three auxiliary converters are also available to provide required system level control voltages or monitor system signals. All devices are optimized for low power, small form factor and provide a cost effective solution for the broadband communication market.

The AD9861 uses a single input clock pin (CLKIN) to generate all system clocks. The ADCs and TxDAC Converters clock are generated within a timing generation block which utilizes user programmable options such as divide circuits, PLL multiplier and switches.

A Flexible bi-directional 20-bit I/O bus is used to accommodate a variety of custom digital back ends or open market DSPs. In half duplex systems, the interface supports 20-bit parallel transfers or 10-bit interleaved transfers. In Full duplex systems, the interface supports an interleaved 10-bit ADC bus and an interleaved 10-bit Tx bus. The flexible I/O bus reduces pin count and therefore required package size.

The AD9861 can use either mode pins or a serial programmable interface (SPI) to configure the interface bus, operate the ADC in a low power mode, configure the TxDAC converter interpolation rate, control the ADC power down and TxDAC power down. The SPI allows for more programmable options for both the TxDAC path (for example, coarse and fine gain control, offset control for channel matching) and ADC path (for example, internal duty cycle stabilizer, 2’s complement data format).

The AD9861 is packaged in a 64-pin lfCSP package (low profile, fine pitch chip scale package). The 64-pin lfCSP package footprint is only 9 mm by 9 mm and is less than 0.9 mm high fitting into tightly spaced applications such as PCMCIA cards.

Applications

Broadband Access

Broadband LAN

Communications (Modems)

Part#	RxTx Function	Channel BW MHz	IF or RF Range MHz	Primary Application	Supply V	Product Description	Price* (1000-4999)	Resolution (Bits)	# Chan	T-Put Rate
AD9868	Bband CODEC	-	-	Broadband Wireline, Home Networking	Multi(+3.3Anlg, +3.3Dig)	10-Bit DAC/80 MSPS, 10-Bit ADC, Mixed-Signal Front-End for Broadband Modem Applications	-	10	1	80MSPS
AD9865	Bband CODEC	35	DC-40	Broadband Wireline, Home Networking	Single(+3.3)	10-Bit DAC/80 MSPS, 10-Bit ADC, Mixed-Signal Front-End for Broadband Modem Applications	$9.95	10	1	80MSPS
AD9869	Bband CODEC	54	DC-40	Broadband Wireline, Home Networking	Multi(+3.3Anlg, +3.3Dig), Single(+3.3)	12-Bit DAC/80 MSPS, 12-Bit ADC, Mixed-Signal Front-End for Broadband Modem Applications	$18.05	12	1	80MSPS
AD9866	Bband CODEC	35	DC-40	Broadband Wireline, Home Networking	Single(+3.3)	12-Bit DAC/80 MSPS 12-Bit ADC, Mixed-Signal Front-End for Broadband Modem Applications	$18.55	12	1	80MSPS
AD9863	Bband Quadrature CODEC	25/40	DC-40	Broadband Wireless	Single(+3), Single(+3.3)	Dual, 12-Bit DAC/12-Bit 50/80 MSPS ADC, Mixed-Signal Front-End Processor (MxFE™) For Bband Apps	$21.42	12	2	50MSPS
AD9861-50	Bband Quadrature CODEC	25	DC-40	Broadband Wireless	Single(+3), Single(+3.3)	Dual 10-Bit DAC/Dual 50 MSPS ADC Mixed-Signal Front-End (MxFE™) For Broadband Comms Apps	$10.71	10	2	50MSPS
AD9861-80	Bband Quadrature CODEC	40	DC-40	Broadband Wireless	Single(+3), Single(+3.3)	Dual 10-Bit DAC/Dual 80 MSPS ADC Mixed-Signal Front-End (MxFE™) For Broadband Comms Apps	$10.71	10	2	80MSPS
AD9862	Bband Quadrature CODEC	32	DC-100	Broadband Wireless	Single(+3.3)	Dual 14-Bit DAC/Dual 12-Bit ADC Mixed Sig Front-End (MxFE™) for Bband Comms, Rx&Tx PGA, Digital SSB	$29.75	12	2	64MSPS
AD9860	Bband Quadrature CODEC	32	DC-100	Broadband Wireless	Single(+3.3)	Dual 12-Bit DAC/Dual 10-Bit ADC Mixed Sig Front-End (MxFE™) for Bband Comms, Rx&Tx PGA, Digital SSB	$13.74	10	2	64MSPS
AD6600	IF-to-Bits Rx Subsys	5 to 10	70-250	Wireless Infrastructure	Multi(+3.3, +5), Single(+5)	11-Bit, 1-Channel 20MSPS, or 2-Channel 10 MSPS Gain-Ranging ADC with RSSI	$38.50	11	2	20MSPS
AD9864	IF-to-Bits Rx Subsys	0.007 to 0.270	10-300	Narrowband Radio, Portable & Mobile Radio	Single(+3), Single(+3.3)	24-Bit Bandpass Sigma-Delta ADC/IF Digitizing Subsystem	$9.95	24	1	375kSPS
AD9874	IF-to-Bits Rx Subsys	0.007 to 0.270	10-300	Narrowband Radio, Portable & Mobile Radio	Single(+3), Single(+3.3)	24-Bit Bandpass Sigma-Delta ADC IF Digitizing Subsystem	$14.96	24	1	541.5kSPS
AD6650	IF-to-Bits Rx Subsys	3.5	70-300	Wireless Infrastructure	Single(+3), Single(+3.3)	16/24-Bit, 1 MSPS, Diversity IF-to-Baseband GSM/EDGE Narrowband Receiver	$20.40	24	2	1MSPS
AD9969	Multi-Chan Bband CODEC	8	DC-70	Cable Modem/Set Top Box	Single(+3.3)	3.3 V CMOS MxFE™ Mixed Signal Front End for broadband Set Top Box And Cable Modem applications	$14.25	12	3	29MSPS
AD9878	Multi-Chan Bband CODEC	8	DC-70	Cable Modem/Set Top Box	Single(+3.3)	Dual 12-Bit, 29 MSPS Direct IF ADC/12-Bit Direct IF DAC, Mixed-Signal Front-End for Broadband Apps	$13.52	12	4	29MSPS
AD9879	Multi-Chan Bband CODEC	8	DC-70	Cable Modem/Set Top Box	Single(+3.3)	12-Bit Mixed-Signal Front-End for Set Top Box & Cable Modem Applications	$11.98	12	5	29MSPS

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.