The AD8106 and AD8107 are high speed, 16 × 5 video crosspoint switch matrices. They offer a -3 dB signal bandwidth greater than 260 MHz, and channel switch times of less than 25 ns with 1% settling. With -78 dB of crosstalk and -97 dB isolation (@ 5 MHz), the AD8106/AD8107 are useful in many high speed applications. The differential gain and differential phase of greater than 0.02% and 0.02° respectively, along with 0.1 dB flatness out to 60 MHz, make the AD8106/AD8107 ideal for video signal switching.

The AD8106 and AD8107 include five independent output buffers that can be placed into a high impedance state for paralleling crosspoint outputs, preventing off channels from loading the output bus. The AD8106 has a gain of 1, while the AD8107 offers a gain of 2. Both operate on voltage supplies of ±5 V while consuming only 30 mA of idle current. The channel switching is performed via a parallel control, allowing updating of an individual output without reprogramming the entire array.

The AD8106/AD8107 are offered in an 80-lead LQFP and are available over the extended industrial temperature range of -40°C to +85°C.

Part#	Type	Output Buffer	Supply Voltage (V)	Output Swing (V)	Small Signal BW (MHz)	Slew Rate (V/us)	Cross Talk @ 10 MHz (-dB)	Price* (1000-4999)
AD8104	32 x 16	Yes G = 1	±2.5	±2	600	1,800	72	$175.00
AD8105	32 x 16	Yes G = 2	±2.5	±2	600	1,800	68	$175.00
AD8106	16 x 5	Yes G = 1	±5	±3	390	500	70	$14.95
AD8107	16 x 5	Yes G = 2	±5	±3	260	500	80	$14.95
AD8108	8 X 8	Yes G = 1	±5	±2.5	350	400	76	$18.50
AD8109	8 X 8	Yes G = 2	±5	±3	250	480	83	$18.50
AD8110	16 x 8	Yes G = 1	±5	±3	390	500	70	$32.50
AD8111	16 x 8	Yes G = 2	±5	±3	260	500	80	$32.50
AD8112	16 x 8	Yes G = 2	±12	±10	60	100	83 @ 20 kHz	$9.95
AD8113	16 X 16	Yes G = 2	±12	±10	60	100	83 @ 20 kHz	$24.95
AD8114	16 X 16	Yes G = 1	±5	±3	225	375	60	$53.99
AD8115	16 X 16	Yes G = 2	±5	±3	200	450	52	$53.99
AD8116	16 X 16	Yes G = 1	±5	±3	200	300	60	$79.00
AD8117	32 X 32	Yes G = 1	±2.5	±2	600	1,800	65	$295.00
AD8118	32 X 32	Yes G = 2	±2.5	±2	600	1,800	70	$295.00
AD8175	Triple 16 x 9	Yes G = 2	±2.5	±2	500	1,800	82	$95.00
AD8176	Triple 16 x 9	Yes G = 4	±2.5	±2	450	1,650	74	$95.00
AD8177	Triple 16 x 5	Yes G = 2	±2.5	±2	500	1,800	82	$59.50
AD8178	Triple 16 x 5	Yes G = 4	±2.5	±2	450	1,650	74	$59.50
ADG2128	16 x 8	No	±5	±5	300	n/a	79 dB @ 5 MHz	$6.18

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.