The ADM6711/ADM6713 are reset generator circuits suitable for use in microprocessor-based systems. They provide a reset signal on power-up, power-down, and whenever the supply voltage falls below a preset threshold. In addition, both parts have a debounced manual reset input so that a reset signal can also be initiated with an external switch or logic signal.

With six different reset threshold options available ranging from 2.32 V to 4.63 V, the ADM6711/ADM6713 are suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V supplies. A reset timeout of at least 140 ms occurs when V_CC rises above the threshold. This gives the supply voltage time to stabilize before the microprocessor starts up.

The ADM6711 has a push-pull output, so no additional external components are needed. The ADM6713 open-drain output requires an external pull-up resistor that can be connected to a voltage higher than V_CC, if desired.

The parts are highly reliable with accurate voltage references and immunity to fast, negative-going transients on V_CC. Low current consumption and space-efficient, 4-lead SC70 packaging make the ADM6711/ADM6713 ideal for use in low power portable applications.

Applications

Microprocessor systems

Computers

Controllers

Intelligent instruments

Automotive systems

Data Sheet, Rev. A, 12/06

Part#	Reset Threshold (V)	Min Reset Timeout (ms)	Reset Output-Stage	Manual Reset Capability	Package	Price* (1000-4999)
ADM1810	4.35, 4.62	100	Active-Low/Push-Pull	No	SC70, SOT	$0.45
ADM1811	4.35, 4.62	100	Active-Low/Int-Pullup	No	SC70, SOT	$0.45
ADM1812	4.35, 4.62	100	Active-High/Push-Pull	No	SC70, SOT	$0.45
ADM1813	4.35, 4.62	100	Active-Low/Int-Pullup	Yes	SC70, SOT	$0.39
ADM1815	2.18, 2.31, 2.55, 2.88, 3.06	100	Active-High/Push-Pull	No	SC70, SOT	$0.39
ADM1816	2.18, 2.31, 2.55, 2.88, 3.06	100	Active-Low/Int-Pullup	No	SC70, SOT	$0.45
ADM1817	2.18, 2.31, 2.55, 2.88, 3.06	100	Active-High/Push-Pull	No	SC70, SOT	$0.45
ADM1818	2.18, 2.31, 2.55, 2.88, 3.06	100	Active-Low/Int-Pullup	Yes	SC70, SOT	$0.44
ADM6315	2.63, 2.93, 3.08, 4.39, 4.5, 4.63	1, 1,120, 140, 20	Active-Low/Open-Drain	Yes	SOT	$0.80
ADM6319	2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0	1, 1,120, 140, 20	Active-High/Push-Pull, Active-Low/Push-Pull	Yes	SOT	$0.50
ADM6322	2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0	1, 1,200, 140, 20	Active-High/Push-Pull, Active-Low/Open-Drain	Yes	SOT	$0.50
ADM6384	1.58, 1.67, 2.19, 2.31, 2.4, 2.5, 2.63, 2.7, 2.8, 2.93, 3.0, 3.08, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8, 3.9, 4.0, 4.1, 4.2, 4.3, 4.39, 4.5, 4.63, 4.7, 4.8, 4.9, 5.0	1, 1,120, 140, 20	Active-Low/Push-Pull	Yes	SC70	$0.94
ADM6711	2.32, 2.63, 2.93, 3.08, 4.38, 4.63	140	Active-Low/Push-Pull	Yes	SC70	$0.26
ADM6713	2.32, 2.63, 2.93, 3.08, 4.38, 4.63	140	Active-Low/Open-Drain	Yes	SC70	$0.28
ADM6825	1.58, 1.67, 2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63	140	Active-High/Push-Pull, Active-Low/Push-Pull	Yes	SOT	-
ADM698	4.65	140	Active-High/Push-Pull, Active-Low/Push-Pull	No	DIP, SOIC	$1.35
ADM707	4.65	160	Active-High/Push-Pull, Active-Low/Push-Pull	Yes	DIP, SOIC	$0.96
ADM708	2.63, 2.93, 3.08, 4.4, 4.65	160	Active-High/Push-Pull, Active-Low/Push-Pull	Yes	DIP, SOIC, SOP	$0.84
ADM709	2.63, 2.93, 3.08, 4.4, 4.65	140	Active-Low/Push-Pull	No	DIP, SOIC	$0.70
ADM803	2.32, 2.63, 2.93, 3.08, 4.38, 4.63	140	Active-Low/Open-Drain	No	SC70	$0.26
ADM809	2.32, 2.63, 2.93, 3.08, 4.0, 4.38, 4.63	140	Active-Low/Push-Pull	No	SC70, SOT	$0.61
ADM810	2.32, 2.63, 2.93, 3.08, 4.0, 4.38, 4.63	140	Active-High/Push-Pull	No	SC70, SOT	$0.60
ADM811	2.32, 2.63, 2.93, 3.08, 4.38, 4.63	140	Active-Low/Push-Pull	Yes	SOT	$0.45
ADM812	2.32, 2.63, 2.93, 3.08, 4.38, 4.63	140	Active-High/Push-Pull	Yes	SOT	$0.45
ADM825	2.19, 2.32, 2.63, 2.93, 3.08, 4.38, 4.63	140	Active-High/Push-Pull, Active-Low/Push-Pull	Yes	SC70, SOT	$0.50
ADM8698	4.65	140	Active-High/Push-Pull, Active-Low/Push-Pull	No	DIP, SOIC	$1.99

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.