The ADIS16201 is a complete, dual-axis acceleration and inclination angle measurement system available in a single compact package enabled by ADI’s iSensor^TM integration. By enhancing ADI's iMEMS® sensor technology with an embedded signal processing solution, the ADIS16201 provides factory calibrated and tunable digital sensor data in a convenient format that can be accessed using a simple SPI serial interface. The SPI interface provides access to measurements of the following parameters: dual-axis linear acceleration, dual-axis linear inclination angle, temperature, power supply and one auxiliary analog input. Easy access to calibrated digital sensor data provides developers with a system-ready device, reducing development time, cost and program risk.

Unique characteristics of the end system can be easily accommodated via several built-in features including an auto-zero recalibration via a single register command, as well as configurable sample rate and frequency response.

The ADIS16201 also offers a comprehensive set of features which can be used to further reduce the hardware complexity of system designs. These integrated features include a configurable alarm function, auxiliary 12-bit ADC, auxiliary 12-bit DAC, configurable digital I/O port, and a digital self test function. The ADIS16201 offers two different power management features that can be enabled via the SPI port; a programmable duty cycle sleep mode for systmes that do not require continuous operation and a low power mode for systems that can trade reduced sample rates for more efficient power operation.

The ADIS16201 is available in a 9.2mm x 9.2mm x 4mm Land Grid Array (LGA) package with a temperature range of -40°C to +125°C.

Applications

Platform Stabilization and Leveling

Tilt Sensing, Inclinometers

Motion / Position Measurement

Monitor / Alarm Devices (Security, Medical, Safety)

Part#	Product Description	Output Type	TypicalBand Width (kHz)	Sensing Axes	Voltage Supply (V)	Range	Sensitivity	Sensitivity Accuracy (%)	Temp Range (°C)	Supply Current (max)	Temp Sensor	Package	Price* (1000-4999)
ADIS16003	Dual Axis ±1.7g Accelerometer with SPI Interface	SPI	2.25	X, Y	3 to 5.25	+/- 1.7g	0.001 g/LSB	±7	-40 to 125°C	1.4mA	Yes	7mm x 7mm LGA	$17.75
ADIS16006	Dual Axis ±5g Accelerometer with SPI Interface	SPI	2.25	X, Y	3 to 5.25	+/- 5g	0.004 g/LSB	±6	-40 to 125°C	1.4mA	Yes	7mm x 7mm LGA	$17.75
ADIS16201	Programmable Dual Axis Accelerometer/Inclinometer	SPI	2.25	X, Y	3 to 3.6	+/- 1.7g	0.10 °/LSB	±1	-40 to 125	11mA	Yes	9 mm x 9mm LGA	$23.75
ADIS16203	Programmable Single Axis 360° Inclinometer	SPI	2.25	Z	3 to 3.6	+/- 180°	0.025 °/LSB	-	-40 to 125	11mA	Yes	9 mm x 9mm LGA	$23.75
ADIS16204	Programmable Hi-G Digital Accelerometer, Impact Sensor	SPI	0.4	X, Y	3 to 3.6	+/- 70g X & +/- 37g Y	17.125 mg/LSB	-	-40 to 105°C	12mA	Yes	9 mm x 9mm LGA	$20.95
ADIS16209	High Accuracy (0.1°), Dual-Axis Digital Accelerometer/Inclinometer	SPI	0.05	X, Y or Z	3 to 3.6	+/- 90° or +/- 180°	0.025 °/LSB	±0.4	-40 to 125°C	14mA	Yes	9 mm x 9mm LGA	$34.40

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.