The AD8335 is a quad Variable Gain Amplifier (VGA) with low noise preamplifier intended for cost and power sensitive applications. AD8335 features four channels with 48 dB gain range; fully differential signal paths; and active input preamplifier matching. The AD8335 has an output gain switch of 8 dB and separate gain controls for each channel.

The aggregate input referred voltage noise at maximum gain is 1.3 nV/√Hz; the preamplifier (PrA) has 1.2 nV/√Hz. The PrA has a single-ended to differential gain of 8 (18.06 dB) and a maximum input signal capability is 625 mV_PK-PK.

Assuming a 20 MHz noise bandwidth (NBW), the Nyquist frequency for a 40 MHz ADC, the input SNR is 92 dB. The HILO pin optimizes the output SNR for 10 and 12 bit ADCs with 1 or 2 Vpp full-scale (FS) inputs.

Channels 1 and 2 are enabled through the EN12 pin while channels 3 and 4 are enabled through the EN34 pin. For VGA only applications, the PrAs can be powered down, significantly reducing power consumption.

The AD8335 is available in a 64 pin chip scale (9x9 mm) package for the industrial temperature range of -40°C to +85°C.

Part#	Gain Control	-3 dB BW (MHz)	Gain Low End (dB)	Gain High End (dB)	Number of Channels	Spectral Noise (nV/rtHz)	Supply Voltage (V)	Supply Current (max)	Gain Accuracy (dB)	1 dB Comp Point (dBm)	Package	Price* (1000-4999)
AD600	Analog	35	0	+40	2	1.4	±5	14mA	-	-	-	$16.41
AD602	Analog	35	-10	+30	2	1.4	±5	14mA	-	-	-	$13.20
AD603	Analog	90	-11	+31	1	1.4	±5	20mA	±0.5	-	8-Lead DIP, 8-Lead SOIC	$4.35
AD604	Analog	40	0	+48	2	0.8	±5	31mA	±0.3	15	24-Lead SOIC, 24-Lead SSOP	$16.25
AD605	Analog	40	-14	+34	2	1.8	+5	23mA	±0.2	15	16-Lead SOIC	$9.79
AD8260	Digital	180	-6	+24	1	2.4	+3.3	28mA	+0.25	-	-	$3.79
AD8320	Digital	150	-10	+26	1	53	+12	105mA	±0.2	22.5	20-Lead SOIC	-
AD8321	Digital	120	-27.4	+26	1	20	+9	90mA	±1	19.5	20-Lead SOIC	$4.35
AD8322	Digital	180	-12.6	+29.5	1	64	+5	113mA	±2	19	28-Lead TSSOP	$3.15
AD8323	Digital	100	-26	+27.5	1	-	+5	-	-	-	28-Lead TSSOP	$3.30
AD8324	Digital	100	-25.5	+33.5	1	157	+3.3	207mA	±1	21	20-Lead LFCSP, 20-Lead QSOP	$1.71
AD8325	Digital	100	-29.5	+30	1	56	+5	133mA	±1	18.5	28-Lead TSSOP	$3.30
AD8326	Digital	100	-26	+27.5	1	100	±5	157mA	±1	26.5	28-Lead PSOP, 28-Lead TSSOP	$3.90
AD8327	Digital	160	-18	+30	1	64	+5	105mA	±1	18	20-Lead TSSOP	$3.75
AD8328	Digital	107	-27.5	+31.5	1	135	-	120mA	±1	18.4	20-Lead LFCSP, 20-Lead QSOP	$1.90
AD8330	Analog	150	0	+50	1	5	+6	20mA	±0.5	-	16-Lead LFCSP, 16-Lead QSOP	$4.39
AD8331	Analog	120	-4.5	+43	1	0.74	+5	25mA	+0.5	7	-	$5.39
AD8332	Analog	120	-4.5	+43.5	2	0.74	+5	58mA	+0.5	7	28-Lead TSSOP, 32-Lead CSP	$10.44
AD8334	Analog	100	+4.5	+43.5	4	0.74	+5	116mA	+0.5	7	64-Lead LFCSP	$14.49
AD8335	Analog	70	-10	+38	4	1.3	+5	76mA	±0.2	18	64-Lead LFCSP	$12.00
AD8336	Analog	115	-14	+46	1	3	±12	25mA	±0.5	11	16-Lead LFCSP	$4.59
AD8337	Analog	280	0	+24	1	2.2	±5	15mA	±0.25	-	8-Lead LFCSP	$2.49
AD8367	Analog	500	-2.5	+42.5	1	1.84	+5.5	26mA	±0.2	8.1	14-Lead TSSOP	$4.55
AD8368	Analog	800	-12	+22	1	-	+5	-	±0.4	13	24-Lead LFCSP	$4.55
AD8369	Digital	600	-5	+40	1	2	+5.5	37mA	±0.5	0.5	16-Lead TSSOP	$4.20
AD8370	Digital	700	+25	+34	1	2.1	+5.5	78mA	-	14	16-Lead TSSOP	$4.20
AD8375	Digital	690	-4	+20	1	-	+5	130mA	±0.2	19	24-Lead LFCSP	$4.49
AD8376	Digital	690	-4	+20	2	-	+5	260mA	±0.2	19	32-Lead CSP	$6.49
ADL5330	Analog	3000	-34	+22	1	-	+5	240mA	-	1.2	24-Lead LFCSP	$4.98
ADL5390	Analog	2400	-	+7	1	-	+5	130mA	-	9.6	24-Lead LFCSP	$7.50
ADL5391	Analog	2000	-	+9.5	1	26.7	+5	135mA	-	15.1	16-Lead LFCSP	$4.89

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.