Instrumentation designers who purchased the OP177 also bought:
OP37 - Low Noise, Precision, High Speed Operational Amplifier (A(VCL) ± 5)
AD711 - Precision, Low Cost, High Speed, BiFET Op Amp
OP27 - Low Noise, Precision Operational Amplifier
AD7538 - µP-Compatible 14-Bit CMOS DAC
AD7547 - Dual 12-Bit CMOS DAC with Parallel Load Input Structure

The OP-177 features the highest precision performance of any op amp currently available. Offset voltage of the OP-177 is only 10µV typical, 25µV MAX over room temp. The ultra-low VOS of the OP-177 combines with its exceptional offset voltage drift (TCVOS) of 0.1µV/°C typical, 0.3µV/°C MAX, to eliminate the need for external VOS adjustment and increases system accuracy over temperature.

The OP-177's open-loop gain of 12V/µV typical is maintained over the full ±10V output range. CMRR of 130dB MIN, PSRR of 115dB MIN, and maximum supply current of 2mA are just a few examples of the excellent performance of this operational amplifier. The OP-177's combination of outstanding specifications insures accurate performance in high closed-loop gain applications. This low noise bipolar input op amp is also a cost effective alternative to chopper stabilized amplifiers. The OP-177 provides chopper-type performance without the usual problems of high noise, low-frequency chopper spikes, large physical size limited common-mode input voltage range, and bulky external storage capacitors.

The OP-177 is offered at -40°C to +85°C extended industrial temperature ranges. This product is available in 8-pin epoxy DIP's, as well as the space saving 8-pin Small Outline (SO).

Part#	Small Signal Bandwidth	Slew Rate	Vos	Ib	V Noise Density	Amplifiers Per Package	Widest Temp Range (°C)
OP177	600KHz	300mV/µs	10µV	1.2nA	11nV/rtHz	1	-40 to +85
AD8675	10MHz	2.5V/µs	10µV	500pA	2.8nV/rtHz	1	-40 to +125
OP07	600KHz	300mV/µs	30µV	1nA	9.6nV/rtHz	1	-40 to +85
AD8510	8MHz	20V/µs	80µV	21pA	7.6nV/rtHz	1	-40 to +85
AD8067	54MHz	640V/µs	200µV	600fA	6.6nV/rtHz	1	-40 to +85
AD8033	80MHz	80V/µs	1mV	1.5pA	11nV/rtHz	1	-40 to +85
AD8065	145MHz	180V/µs	400µV	2pA	7nV/rtHz	1	-40 to +85
OP1177	1.3MHz	700mV/µs	15µV	500pA	7.9nV/rtHz	1	-40 to +125
OP77	600KHz	300mV/µs	50µV	1.2nA	9.8nV/rtHz	1	-55 to +125
AD8538	430KHz	400mV/µs	5µV	15pA	50nV/rtHz	1	-40 to +125
AD8551	1.5MHz	400mV/µs	1µV	10pA	42nV/rtHz	1	-40 to +125

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.