The AD8205 is a high-performance, single-supply difference amplifier with a wide input common mode voltage (CMV) operational range of -2 V to 65 V, which allows the chip to measure small differential voltages--such as across a shunt resistor--in the presence of high voltages (large CMV). Additionally, the device can survive over an input CMV range of -5 V to 70 V. Excellent dc performance over temperature keeps errors in the measurement loop to a minimum. Offset drift is less than 20 microV/degrees C, and gain drift is below 20 ppm/degrees C (up to 125 degrees C). The AD8205 also has very high common-mode rejection of 80 dB, which extends from dc up to 100 kHz. The part’s ability to reject high, common mode voltages while reading small differential voltages eliminates error sources commonly associated with current sensing in electro-mechanical systems. The AD8205 also is well suited for industrial applications that measure small differential voltages in the presence of high CMV. Many industrial current sensing applications, such as hydraulic systems and motor control, already require this extended CMV range.

Part#	Common Mode Range (V)	Bandwidth G=10 (kHz typ)	CMRR (dB)	Gain Range (min to max)	Voltage Supply (Vmin)	Voltage Supply (Vmax)	Supply Current (max)	VosiTC (µV/deg C)	Gain temp co.	Temperature Range	Package	Price* (1000-4999)
AD22057	-1 to 24	30	80	20	+3	+26	0.5mA	-	-	-40 to +125	DIP, SOIC	$4.57
AD626	0 to 54	100	66	90	±2.4	±6	2mA	0.000006	150ppm/C	-40 to +85	DIP, SOIC	$3.66
AD628	+/- 100	600	77	100	±5	±18	1.6mA	-	-	-40 to +85	SOIC	$1.76
AD629	+/- 270	500	77	1	±2.5	±18	1mA	-	-	-40 to +85	DIP, SOIC	$2.81
AD8202	-12 to 30	50	82	20	+3.5	+12	0.25mA	10	20ppm/C	-40 to +125	Die, SOIC, SOP	$1.49
AD8203	-12 to 30	60	82	14	+3.5	+12	0.25mA	10	20ppm/C	-40 to +125	SOP	$1.35
AD8205	-2 to 65	50	78	50	+4.5	+5	2mA	15	30ppm/C	-40 to +125	Die, SOIC	$1.49
AD8206	-2 to 65	100	76	20	+4.5	+5.5	2mA	15	30ppm/C	-40 to +125	Die, SOIC	$1.35
AD8210	-2 to 65	500	100	20	+4.5	+5.5	1.5mA	10	20ppm/C	-40 to 150	SOIC	$1.79
AD8211	-2 to 65	500	120	20	-	-	2mA	12	20ppm/C	-40 to +125	-	$0.80
AD8212	7 to 65	1000	100	1,000	+7	+65	720µA	10	-	-20 to +125	-	$0.92
AD8213	-2 to 65	500	100	20	+4.5	+5.5	2.5mA	12	10ppm/C	-40 to +125	-	$1.99
AD8214	5 to 65	-	80	100	+5	+65	1.2mA	15	-	-40 to +125	-	$0.75
AD8215	-2 to 65	450	100	20	-	-	2.2mA	6	15ppm/C	-40 to +125	-	$1.20
AD8216	-4 to 65	3000	90	3	-	-	-	10	10ppm/C	-40 to +125	-	$1.60
AD8228	-	560	100	90	-	-	-	-	-	-40 to +85	-	$2.99
AD8270	-Vs to +Vs	10000	98	1.5	-	-	2.5mA	1.5	1ppm/C	-40 to +125	-	$1.89
AD8273	+/- 40	20000	86	1.5	-	-	2.5mA	3	2ppm/C	-40 to +125	-	$1.65
AD8290	-	-	120	50	-	-	4.68mA	-	15ppm/C	-	-	$1.50
AD8553	-	1	100	10,000	+1.8	+5.5	1.3mA	-	-	-40 to +85	MSOP	$1.30
ADM4073	2 to 28	1800	90	40	+3	+28	-	-	-	-40 to +125	SOT	$0.99
AMP03	+/- 20	3000	85	1	±5	±15	2.5mA	-	-	-40 to +85	-	$2.78

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.