The CMP401 and CMP402 are 23 ns and 65 ns quad comparators with separate input and output supplies. Separate supplies enable the input stage to be operated from +3 volts to as high as ±6 volts. The output can be supplied with either +3 volts or +5 volts as determined by the interface logic or available supplies. Independent input and output supplies combined with fast propagation make the CMP401 and CMP402 excellent choices for interfacing to portable instrumentation.

The CMP401 and CMP402 are specified over the extended industrial (-40°C to +125°C) temperature range. Both are available in 16-pin plastic DIP or narrow SO-16 surface mount packages. Consult factory for 16-lead TSSOP availability.

Part#	Prop Delay (ns)typ	# Per Pkg	Total Power (mW)	Voltage Supply (V)	No of Supplies	Input Range (V)	Logic Output	Adjustable Hysteresis	Min Pulse Width
AD790	45	1	250	+/-15	3	-Vs to Vs -2V	TTL/CMOS	Fixed	-
AD8561	7	1	65	+/- 5	2	-5.0V to +3.0V	Diff/TTL	-	-
AD8564	8	4	150	+/- 5	2	-5.0V to +3.0V	TTL/CMOS	-	-
AD8611	5.5	1	50	3 to 5	1	0 to 3V	Diff/TTL	-	-
AD8612	5.5	2	100	3 to 5	1	0 to 3V	Diff/TTL	-	-
AD96685	6	1	120	5, -5.2	2	-2.5V to +5.0V	Diff/ECL	-	-
AD96687	6	2	240	5, -5.2	2	-2.5V to +5.0V	Diff/ECL	-	-
ADCMP551	0.75	2	60	3.3 to 5	1	-0.2 to Vcc-2V	PECL	-	700ps
ADCMP552	0.75	2	60	3.3 to 5	1	-0.2 to Vcc-2V	PECL	X	700ps
ADCMP553	0.75	1	30	3.3 to 5	1	-0.2 to Vcc-2V	PECL	-	700ps
ADCMP561	0.75	2	160	5, -5.2	2	-2 to 3V	PECL	-	700ps
ADCMP562	0.75	2	160	5, -5.2	2	-2 to 3V	PECL	X	700ps
ADCMP563	0.75	2	120	5, -5.2	2	-2 to 3V	ECL	-	700ps
ADCMP564	0.75	2	120	5, -5.2	2	-2 to 3V	ECL	X	700ps
ADCMP572	0.15	1	145	3.3 to 5	1	-0.2 to Vcci-2.1V	CML	X	80ps
ADCMP573	0.15	1	145	3.3 to 5	1	-0.2 to Vcci-2.1V	PECL	X	80ps
ADCMP580	0.15	1	240	5, -5.2	2	-2 to 3V	CML	X	80ps
ADCMP581	0.15	1	240	5, -5.2	2	-2 to 3V	ECL	X	80ps
ADCMP582	0.15	1	240	5, -5.2	2	-2 to 3V	PECL	X	80ps
ADCMP600	3	1	6	2.5 to 5.5	1	-0.2 to Vcc+0.2V	TTL/CMOS	-	3ns
ADCMP601	3	1	6	2.5 to 5.5	1	-0.2 to Vcc+0.2V	TTL/CMOS	X	3ns
ADCMP602	3	1	6	2.5 to 5.5	2	-0.2 to Vcc+0.2V	TTL/CMOS	X	3ns
ADCMP603	3	1	6	2.5 to 5.5	3	-0.5 to Vcc+0.5V	TTL/CMOS	X	3ns
ADCMP604	1.5	1	42	2.5 to 5.5	1	-0.2 to Vcc+0.2V	LVDS	-	1ns
ADCMP605	1.5	1	42	2.5 to 5.5	2	-0.2 to Vcc+0.2V	LVDS	X	1ns
ADCMP606	1	1	62	2.5 to 5.5	1	-0.2 to Vcc+0.2V	CML	-	600ps
ADCMP607	1	1	62	2.5 to 5.5	2	-0.2 to Vcc+0.2V	CML	X	600ps
ADCMP608	30	1	1	2.5 to 5.5	1	-0.2 to Vcc+0.2V	TTL/CMOS	-	35ns
ADCMP609	30	1	1	2.5 to 5.5	1	-0.2 to Vcc+0.2V	TTL/CMOS	X	35ns
CMP401	23	4	110	+/- 5	2	-5.0V to +4.0V	TTL/CMOS	-	-

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.