The AD9514 features a multi-output clock distribution IC in a design that emphasizes low jitter and phase noise to maximize data converter performance. Other applications with demanding phase noise and jitter requirements also benefit from this part.

There are three independent clock outputs. Two of the outputs are LVPECL, and the third output can be set to either LVDS or CMOS levels. The LVPECL outputs operate to 1.6 GHz, and the third output operates to 800 MHz in LVDS mode and to 250 MHz in CMOS mode.

Each output has a programmable divider, which can be set to divide by a selected set of integers ranging from 1 to 32. The phase of one clock output relative to another clock output can be set by means of a divider phase select function that serves as a coarse timing adjustment.

The LVDS/CMOS output features a delay element with three selectable full-scale delay values (1.5 ns, 5 ns, and 10 ns), each with 16 steps of fine adjustment.

The AD9514 does not require an external controller for operation or setup. The device is programmed by means of 11 pins (S0 to S10) using 4-level logic. The programming pins are internally biased to ⅓ VS. The VREF pin provides a level of ⅔ VS. VS (3.3 V) and GND (0 V) provide the other two logic levels.

The AD9514 is ideally suited for data converter clocking applications where maximum converter performance is achieved by encode signals with subpicosecond jitter.

The AD9514 is available in a 32-lead LFCSP and operates from a single 3.3 V supply. The temperature range is −40°C to +85°C.

Applications

Low jitter, low phase noise clock distribution

Clocking high speed ADC, DAC, DDS, DDC, DUC, MxFE

High performance wireless transceivers

High performance instrumentation

Broadband infrastructure

ATE

Part#	Product Description	+Supply Voltage (V)	# of Inputs	# of Outputs	On-Chip VCO or DCO	Max f-out (MHz)	Output Logic	Random Jitter (ps-RMS)	Package	Price* (1000-4999)
AD9510	Multi-Output Clock Generator	3.3	1	8	No	1200	CMOS, LVDS, LVPECL	0.225	64-LFCSP	$11.95
AD9511	Multi-Output Clock Generator	3.3	1	5	No	1200	CMOS, LVDS, LVPECL	0.225	48-LFCSP	$9.95
AD9512	Clock Divider	3.3	1	5	No	1200	CMOS, LVDS, LVPECL	0.225	48-LFCSP	$8.95
AD9513	Clock Divider	3.3	1	3	No	800	CMOS, LVDS	0.3	32-LFCSP	$5.95
AD9514	Clock Divider	3.3	1	3	No	1600	CMOS, LVDS, LVPECL	0.225	32-LFCSP	$5.95
AD9515	Clock Divider	3.3	1	2	No	1600	CMOS, LVDS, LVPECL	0.225	32-LFCSP	$4.75
AD9516-0	Multi-Output Clock Generator	3.3	2	14	Yes	2950	CMOS, LVDS, LVPECL	0.4	64-LFCSP	$12.50
AD9516-1	Multi-Output Clock Generator	3.3	2	14	Yes	2650	CMOS, LVDS, LVPECL	0.4	64-LFCSP	$12.50
AD9516-2	Multi-Output Clock Generator	3.3	2	14	Yes	2335	CMOS, LVDS, LVPECL	0.4	64-LFCSP	$12.50
AD9516-3	Multi-Output Clock Generator	3.3	2	14	Yes	2250	CMOS, LVDS, LVPECL	0.4	64-LFCSP	$12.50
AD9516-4	Multi-Output Clock Generator	3.3	2	14	Yes	1800	CMOS, LVDS, LVPECL	0.4	64-LFCSP	$12.50
AD9517-0	Multi-Output Clock Generator	3.3	2	12	Yes	2950	CMOS, LVDS, LVPECL	0.4	48-LFCSP	$11.40
AD9517-1	Multi-Output Clock Generator	3.3	2	12	Yes	2650	CMOS, LVDS, LVPECL	0.4	48-LFCSP	$11.40
AD9517-2	Multi-Output Clock Generator	3.3	2	12	Yes	2335	CMOS, LVDS, LVPECL	0.4	48-LFCSP	$11.40
AD9517-3	Multi-Output Clock Generator	3.3	2	12	Yes	2250	CMOS, LVDS, LVPECL	0.4	48-LFCSP	$11.40
AD9517-4	Multi-Output Clock Generator	3.3	2	12	Yes	1800	CMOS, LVDS, LVPECL	0.4	48-LFCSP	$11.40
AD9518-0	Multi-Output Clock Generator	3.3	2	6	Yes	2950	LVPECL	0.4	48-LFCSP	$9.85
AD9518-1	Multi-Output Clock Generator	3.3	2	6	Yes	2650	LVPECL	0.4	48-LFCSP	$9.85
AD9518-2	Multi-Output Clock Generator	3.3	2	6	Yes	2335	LVPECL	0.4	48-LFCSP	$9.85
AD9518-3	Multi-Output Clock Generator	3.3	2	6	Yes	2250	LVPECL	0.4	48-LFCSP	$9.85
AD9518-4	Multi-Output Clock Generator	3.3	2	6	Yes	1800	LVPECL	0.4	48-LFCSP	$9.85
AD9540	Clock Generator Synchronizer	3.3	1	1	Yes	655	CML, PECL-Compliant	0.7	48-LFCSP	$9.95
AD9549	Clock Generator Synchronizer	3.3	2	2	Yes	750	CMOS, HSTL	0.6	64-LFCSP	$12.41
ADCLK905	Clock Buffer	3.3	1	1	No	6000	ECL, LVPECL, PECL	0.06	16-LFCSP	$5.60
ADCLK907	Clock Buffer	3.3	2	2	No	6000	ECL, LVPECL, PECL	0.06	16-LFCSP	$6.75
ADCLK925	Clock Buffer	3.3	1	2	No	6000	ECL, LVPECL, PECL	0.06	16-LFCSP	$5.95

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.