Documentation Errata for ADSP-BF51x Blackfin ® Processor Hardware Reference, Rev 1.2, February 2013


Chapter:  2 Page: 2
DOC ID: DOC-1501
Change

In Table 2-1, the ending address for starting address 0xFF80 8000 is incorrect. Instead of 0xFF9F FFFF, the ending address should be 0xFF8F FFFF.

back to top


Chapter:  8 Page: 4
DOC ID: DOC-1427
Change

The statement "The reset value of MSEL is 0x5." is incorrect. The reset value of MSEL is actually 0x6.

In addition, in Figure 8-4 on page 8-21, the binary value of the register should be 0000 1100 0000 0000 and the hexadecimal reset value should be 0x0C00.

back to top


Chapter:  18 Page: 1
DOC ID: DOC-1532
Change

The SPI Serial Flash chapter now requires the following disclaimer:

Warning: This chapter describes the SPI flash memory in ADSP-BF51x processors whose part numbers end in 4F4. If the part number of your ADSP-BF51x processor ends in 4F16, please consult the product data sheet for accurate information regarding the SPI flash memory.

back to top


Last Updated: September 22, 2014
沪ICP备09046653号
Send Feedback X
content here.
content here.

Send Feedback

Close