Documentation Errata for ADSP-2185M: 16-bit, 75 MIPS, 2.5v, 2 serial ports, host port, 80 KB RAM Data Sheet


Chapter: N/A Page: 13
DOC ID: DOC-451
Change
In Table 4 (DMOVLAY Bits), the A12:0 entries for External Overlay 1 and 2 are incorrect. In both instances

Change from: "13 LSBs of Address Between 0x2000 and 0x3FFF"

Change to: "13 LSBs of Address Between 0x0000 and 0x1FFF"

back to top


Chapter: N/A Page: 13
DOC ID: DOC-441
Change
In Table 4 (DMOVLAY Bits), the A12:0 entries for External Overlay 1 and 2 are incorrect. In both instances.

Change from: "13 LSBs of Address Between 0x2000 and 0x3FFF"

Change to: "13 LSBs of Address Between 0x0000 and 0x1FFF"

back to top


Chapter: N/A Page: 15
DOC ID: DOC-445
Change
In Figure 10 (IDMA Control/OVLAY Registers), the description of bit 14 (SHORT READ ONLY) in the IDMA OVERLAY register is incorrect. The correct definition of bit 14 is:

1 = enable Short Read Only
0 = disable Short Read Only

back to top


Chapter: N/A Page: 40
DOC ID: DOC-587
Change
In the outline dimensions figure, the remove following (or similarly worded) note:
THE ACTUAL POSITION OF EACH BALL IS WITHIN ... mm OF ITS IDEAL POSITION RELATIVE TO THE BALL GRID.

back to top


Last Updated: April 16, 2004
沪ICP备09046653号
Send Feedback X
content here.
content here.

Send Feedback

Close