Hot Swap products from Analog Devices perform all the housekeeping functions necessary to hot swap plug-in boards. These parts also integrate with industry-leading converter and amplifier cores for power monitoring and control with patented circuitry delivering unmatched ± 3% monitoring accuracy. Hot swap controllers play a key role in keeping central office switching stations and server banks operating at peak efficiency. These devices safely and accurately monitor the power usage in a typical server rack system which enables operators to remotely monitor each rack individually thus saving energy and minimizing system downtimes.
Analog Devices offers a variety of hot swap controllers including shunt regulated, low and high side FET drivers optimized for -48 V systems. There are also I2C interface hot swap controllers that allow for digital voltage and current data to be read from the device and power consumption for the rail to be calculated.
Hot Swap evaluation software, design resources, tools, and online technical support can help shorten your design time. Designers can quickly select products based on key specifications with our Hot Swap parametric search tables. They can also exchange ideas and get free online design help through the Power Management Support Community on EngineerZone™.
* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing. ** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.
ADM1278- Hot Swap Controller and Digital Power and Energy Monitor with PMBus Interface
The ADM1278 is a hot swap controller that allows a circuit board to be removed from or inserted into a live backplane. It also features current, voltage, and power readback via an integrated 12-bit analog-to-digital converter (ADC), accessed using a PMBus™ interface. The load current is measured using an internal current sense amplifier that measures the voltage across a sense resistor in the
The ADM1270 is a current limiting controller that is intended to provide inrush current limiting and overcurrent protection for modular or battery powered systems. When circuit boards are inserted into a live backplane, discharged supply bypass capacitors draw large transient currents from the backplane power bus as they charge. These transient currents can cause permanent damage to connector