- Do you prefer power tools or hand tools for solving problems?
I prefer hand tools for small to medium sized jobs and power tools for large jobs.
Every day we use "tools" to get things done. In the engineering world, our toolbox is full of all sorts of things: spreadsheets, circuit and mechanical simulation programs, number crunching software (power tools) – you name it, we’ve got it. The latest and greatest, new-fangled tools aren't always the best options for solving problems, however. “The right tool for the job” can make all the difference in the world.
There's nothing like using a finely crafted and tuned tool for tackling a difficult or delicate job. Using one of my vintage Stanley planes in the shop is always a pleasure, and I’m constantly rewarded by its performance … but I digress.
A true test of a tool's usefulness is how often you reach for it, and how comfortable you are with it. At the office, I have an entire arsenal of tools to solve the day-to-day problems we encounter in applications, but my two favorites are Thévenin's theorem and superposition (hand tools). On a white board or piece of paper, these tools enable me to rapidly simplify and solve complex circuit problems. They particularly lend themselves to op amp and differential amplifier applications.
You might laugh that someone would opt to write out a problem by hand, given all the automation and computing power available today. By the time you open a simulation program, enter the schematic, and run the simulation, I can usually have the answer using good old Thévenin’s theorem or superposition.
Thévenin's theorem, you may recall, allows you to replace a linear network with an equivalent open circuit voltage, VTh, and an equivalent series resistor, RTh. To determine RTh, all independent voltage sources are shorted, while independent current sources are open circuited. Superposition addresses linear networks with multiple independent sources. The contribution from each source is calculated individually, while the other voltage and current sources are set to zero. The individual results are then summed to determine the output. The combination of these two tools is extremely powerful.
So, next time you find yourself reaching for a "power tool," stop and think for a moment. Perhaps a "hand tool" might be a better choice. What's your favorite work or hobby tool? Send me an email at (email@example.com), and I'll mention two or three of you and your favorite tools in my next RAQ.
Download this article (pdf)
Have an interesting question?... Ask John!
Visit our Rarely Asked Questions library for a complete listing of all our RAQs.
For more information:
ADA4858-3: Single-Supply, High Speed, Triple Op Amp with Charge Pump
ADA4859-3: Single-Supply, Fixed G = 2, High Speed, Video Amplifier with Charge Pump
ADA4856-3: Single-Supply, High Speed, Fixed G = +2, Rail-to-Rail Output Video Amplifier
AD8000: 1.5 GHz, Ultra-High Speed Op Amp with Power-Down
ADA4855-3: High Speed, Single Supply, Rail-to-Rail Output, Triple Op Amp
ADA4410-6: Integrated Video Filter with Selectable Cutoff Frequencies for RGB, HD/SD, Y, C, and CV
ADA4417: Integrated Triple Video Filter for High Definition Video
ADA4431-1: Ultralow Power SD Video Filter with Load Detection
Analog Filter Wizard
SPICE Simulation Program Download ADIsimADC Design Tool
ADIsimDAC Design Tool
In-Amp Error Budget Calculator
DAC Harmonic Analyzer
Power Management Design Tools
Symbols & Footprints
Utilities and Conversions