D/A Converters : Technical Articles
-
Analog Devices' New Integrated Converter Solutions Reduce Design Costs For Next-Generation Wireless Infrastructures
-
Analog Outputs for Industrial Applications
by Albert O'Grady, Analog Devices, Inc. (Industrial Control Design Line, 4/12/2008)
-
analogZone Review of the AD5379, 40-Channel, 14-Bit Bipolar DAC For ATE And Optical Networking
... One of the incredible things about this 40-channel part is that the channel-to-channel isolation is quoted at a typical 100 dB! How the designers achieved that I cannot imagine but it is a critical specification when you are handling so many signals simultaneously.
(analogZone, 10/14/2002)
-
analogZone Review: The AD9744 is ADI's third generation of TxDAC and is undoubtedly the best.
-
Build a Smart Analog Process-Instrument Transmitter with Low-Power Converters and a Microcontroller
An analog transmitter is a field-mounted device that senses a physical parameter such as pressure or temperature and generates a current proportional to the measured variable in the standard range, 4 to 20 mA.
(Analog Transmitter, 10/28?2009)
-
Camera Phones Nip at Standalone Digital Camera Market
(ElectronicNews, 5/20/2005)
-
Class T Satellite Products
(pdf, 124 kB)
-
Clocking Requirements for High Speed Data Converters
Wireless infrastructure, broadband and instrumentation applications generally require very high performance clocking circuits. This article will discuss the clocking technologies required.
(Part 1 of 4)
(EE Times Europe, 8/18/09)
-
Converters for 3G are Optimized for Cost, Size and Power
by Chris Cloninger, Analog Devices, Inc. (Planet Analog, 4/6/2006)
-
Converters Heed Call of 'Real World'
by Pat O'Doherty, Analog Devices, Inc. (EE Times, 9/12/2005)
-
DDS Device Provides Amplitude Modulation
by Mary McCarthy, Analog Devices, Inc.
(EDN, September 2, 1999)
-
Design A Clock-Distribution Strategy With Confidence
by Demetrios Efstathiou
(Electronic Design, April 27, 2006)
-
Designers Cast A Skeptical Eye On Mixed-Signal SOCs
(EDN, 5/11/2006)
-
Designing DACs into Precision Industrial 10-V Applications
by Brendan Cronin, Analog Devices, Inc. (PlanetAnalog, 3/23/2006)
-
Double DAC Rate by Using Mixers as Switches
by Randall Carver, Analog Devices,Inc. (EDN Design Idea, 2/5/2004)
-
Eliminating Audio System Noise from HDTV
by Mike Mehan, Analog Devices, Inc. (Audio Design Line, 6/25/2008)
-
Filter Design Tools and Wizards
Filters are common in electronic equipment. The common thread is the desire to pass some frequencies, while blocking others.
(ECNmag.com, August 13, 2009)
-
Flow Cytometry Blood Analysis Systems
-
iCMOS - A Breakthrough in Industrial-Sector Electronics
-
Monitor And Control Base-Station Power Amps
by Liam Riordan, Analog Devices, Inc.
(Microwaves & RF, 4/2007)
-
Multi-Channel Analog-to-Digital Converter Module Integration
(pdf, 20 kB)
-
Simplifying Design of Industrial Process-Control Systems with PLC Evaluation Boards (Part 1 of 2)
PLC evaluation board applications for industrial process-control systems are diverse, ranging from simple traffic control to complex electrical power grids, from environmental control systems to oil-refinery process control.
(Industrial Control DesignLine, 8/24/09)
-
Soft Radio Runs into Hard Standards
by Brad Brannon and Chris Cloninger,
Analog Devices Inc.
(EE Times, April 11, 2001)
-
Software Calibration Reduces D/A Converter Offset and Gain Errors
by Ken Kavanagh, Analog Devices, Inc. (Planet Analog, 5/18/2006)
-
They Sure Do Make Them Small
by James Caffrey, Analog Devices, Inc. (Portable Design, 12/2004)
-
Understanding D/A Converter Architectures
The performance of a D/A is determined through a combination of architecture and process ... by James Caffrey, Analog Devices, Inc. (Electronic Products, September 2003)
-
Voltage Level Setting Requirements in RF Power Control Circuits
by James Caffrey, Analog Devices, Inc. (ECN, 6/1/2004)
