
Medical Electronics ICs Solution Bulletin (Vol. 8, Issue 4)
Download this Medical Bulletin
(pdf, 1,855,484 bytes)

|
User experience defines the medical design; ADI defines the possibilities
With Analog Devices inside, medical engineers are dramatically improving the diagnostic experience for patients and practitioners everywhere. That's because ADI offers an industry-leading portfolio of standard and application-tuned ICs for medical designs including amplifiers, data converters, microcontrollers, user interface, and MEMs with unequaled performance, size, cost, and power advantages. From imaging to monitoring to instrumentation—wherever user experience defines medical design, ADI is there.
Analog Devices' 16-Bit, 10-MSPS SAR Converter Surpasses Industry Performance Benchmark
Medical imaging and data acquisition systems gain precision and throughput with PulSAR® ADC that achieves 15 effective number of bits and 2.5 times faster sample rate.
"For high-end X-ray imaging devices, accuracy and throughput are key performance vectors that enable higher image quality and improved frame rates," said Stephane Rossignol, Electronics and ASIC group manager, Trixell, a joint venture company of Thales Electron Devices, Philips Medical Systems and Siemens Healthcare and a leading developer radiological imaging flat panel detectors. "Trixell, a long time collaborator of Analog Devices, chose the AD7626 PulSAR ADC because it meets the speed, precision, power, package-size and price requirements of our end-system designs."
|
Medical ICs Selection Table
| Part # |
Description |
Samples |
| AD7190 |
4.8 kHz Ultra-Low Noise 24-Bit Sigma-Delta ADC with PGA |
Order Samples |
| AD7690 |
18-Bit, 400 kSPS, 1.5 LSB INL, PulSAR® ADC in MSOP/LFCSP |
Order Samples |
| AD7683 |
16-Bit, 100 kSPS PulSAR® ADC in µSOIC/LFCSP |
Order Samples |
| AD7466 |
12-Bit, 1.6 V Micro-Power ADC |
Order Samples |
| AD7468 |
8-Bit, 1.6 V Micro-Power ADC |
Order Samples |
| AD7621 |
16-Bit, 3 MSPS, 2 LSB INL, PulSAR® ADC |
Order Samples |
| AD7626 |
16-Bit, 10MSPS PulSAR Differential ADC |
Order Samples |
| AD7665 |
16-Bit, 570 kSPS, Bipolar PulSAR® ADC |
Order Samples |
| AD7671 |
16-Bit, 1 MSPS, Bipolar PulSAR® ADC |
Order Samples |
| AD7674 |
18-Bit, 800 kSPS PulSAR® ADC |
Order Samples |
| AD7678 |
18-Bit, 100 kSPS PulSAR® ADC |
Order Samples |
| AD7686 |
16-Bit, 500 kSPS PulSAR® ADC in MSOP/LFCSP |
Order Samples |
| AD7693 |
16-bit, 400kSPS, 0.5LSB INL |
Order Samples |
| AD7685 |
16-bit, 250kSPS, 10-QFN |
Order Samples |
| AD7982 |
18-bit, 1MSPS, 7mW |
Order Samples |
| AD9228 |
Quad, 12-Bit, 40/65 MSPS Serial LVDS 1.8 V A/D Converter |
Order Samples |
| AD9219 |
Quad, 10-Bit, 40/65 MSPS Serial LVDS 1.8 V A/D Converter |
Order Samples |
| AD9229 |
Quad 12-Bit, 50/65 MSPS, Serial LVDS A/D Converter |
Order Samples |
| AD9446 |
16-Bit, 80 MSPS / 100 MSPS A/D Converter |
Order Samples |
| AD9271 |
Octal LNA/VGA/AAF/ADC and Crosspoint Switch |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| AD5621 |
2.7 V to 5.5 V, <100 µA, 12-Bit nanoDAC®, with SPI Interface in SC70 Package |
Order Samples |
| AD5443 |
High Bandwidth CMOS 12-Bit Serial Interface Multiplying D/A Converter |
Order Samples |
| AD5445 |
High Bandwidth CMOS 12-Bit Parallel Interface Multiplying D/A Converter |
Order Samples |
| AD9707 |
14-Bit, 175 MSPS TxDAC® Digital-to-Analog Converter |
Order Samples |
| AD9706 |
12-Bit, 175 MSPS TxDAC® Digital-to-Analog Converter |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| ADUM2250 |
Hot Swappable Dual I2C Isolator 5kV - Two bidirectional channels |
Order Samples |
| ADUM2251 |
Hot Swappable Dual I2C Isolator 5kV - One bidirectional channel + one unidirectional channel |
Order Samples |
| ADUM2400 |
Quad Channel 5 kV Digital Isolator - Channel configuration 4/0 |
Order Samples |
| ADUM2401 |
Quad Channel 5 kV Digital Isolator - Channel configuration 3/1 |
Order Samples |
| ADUM2402 |
Quad Channel 5 kV Digital Isolator - Channel configuration 2/2 |
Order Samples |
| ADUM2200 |
Dual Channel 5 kV Digital Isolator - Channel configuration 2/0 |
Order Samples |
| ADUM2201 |
Dual Channel 5 kV Digital Isolator - Channel configuration 1/1 |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| AD5933 |
1 MSPS, 12 Bit Impedance Converter Network Analyzer |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| AD7147 |
CapTouch™ Programmable Controller for Single-Electrode Capacitance Sensors (13 Channel) |
Order Samples |
| AD7148 |
CapTouch™ Programmable Controller for Single-Electrode Capacitance Sensors (8 Channel) |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| ADuC7021 |
ARM7 MCU, 62kB flash, 12-Bit 1MSPS 8-Ch ADC, dual 12-bit DAC; 40-Pin |
Order Samples |
| ADuC7024 |
ARM7 MCU, 62kB flash, 12-Bit 1MSPS 10-Ch ADC, dual 12-bit DAC; 64-Pin |
Order Samples |
| ADuC7128 |
ARM7 MCU, 126kB flash, 12-Bit 1MSPS 10-Ch ADC, DDS DAC; 64-Pin |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| AD8318 |
1 MHz to 8 GHz, 70 dB RF Power Detector/Controller |
Order Samples |
| AD8317 |
1 MHz to 10 GHz, 50 dB RF Power Detector/Controller |
Order Samples |
| AD8319 |
1 MHz to 10 GHz, 40 dB RF Power Detector/Controller |
Order Samples |
| ADL5521 |
Low Noise LNA RF Amplifier (400 - 4000 MHz) |
Order Samples |
| ADL5523 |
High gain LNA RF Amplifier (400 - 4000 MHz) |
Order Samples |
| ADL5320 |
1/4 W Driver RF Amplifier, SOT-89, 400 - 2700 MHz |
Order Samples |
| ADF7021 |
Narrow Band 12.5kHz Transceiver |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| AD9510 |
1.2 GHz Clock Distribution IC, PLL Core, Dividers, Delay Adjust, Eight Outputs |
Order Samples |
| AD9513 |
800 MHz Clock Distribution IC, Dividers, Delay Adjust, Three Outputs |
Order Samples |
| AD9515 |
1.6 GHz Clock Distribution IC, Dividers, Delay Adjust, Two Outputs |
Order Samples |
| AD9540 |
Low Jitter, DDS-based Clock Generator and Synthesizer |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| AD8205 |
High Common-Mode Difference Amplifier |
Order Samples |
| AD8206 |
High Common-Mode Difference Amplifier |
Order Samples |
| AD8220 |
R-R Output JFET Input Instrumentation Amplifier |
Order Samples |
| AD8221 |
Gain Programmable, High Performance Instrumentation Amplifier |
Order Samples |
| AD8222 |
Precision, Dual-Channel Instrumentation Amplifier |
Order Samples |
| AD8224 |
Precision, Dual-Channel, JFET Input, Rail-to-Rail Instrumentation Amplifier |
Order Samples |
| AD8231 |
Zero Drift, R-R, Instrumentation Amp with Software-Programmable Gains of 1, 2, 4, 8, 16, 32, 64, or 128 |
Order Samples |
| AD8250 |
10 MHz, 20 V/µs, G = 1, 2, 5, 10 iCMOS® Programmable Gain Instrumentation Amplifier |
Order Samples |
| AD8251 |
10 MHz, 20 V/µs, G = 1, 2, 4, 8 iCMOS® Programmable Gain Instrumentation Amplifier |
Order Samples |
| AD8333 |
50 MHz, Dual I/Q Demod and Phase Shifter |
Order Samples |
| AD8334 |
Ultralow Preamp and Programmable RIN Quad Variable Gain Amplifier |
Order Samples |
| AD8337 |
280 MHz, DC-Coupled Variable Gain Amplifier |
Order Samples |
| AD8339 |
Precision, Dual-Channel Instrumentation Amplifier in LFCSP |
Order Samples |
| AD8500 |
Micropower, Precision CMOS Op Amp with Maximum Supply Current of 1 µA |
Order Samples |
| AD8506 |
20 µA Maximum, Rail-to-Rail I/O, Zero Input Crossover Distortion Amplifier |
Order Samples |
| AD8515 |
1.8 V Low Power CMOS, R-R I/O Op Amp |
Order Samples |
| AD8538 |
Precision Low Power Instrumentation Amplifier |
Order Samples |
| AD8542 |
10 MHz, Low Supply Current, CMOS, Dual, R-R I/O Amplifier |
Order Samples |
| AD8553 |
Auto-Zero Instrumentation Amplifier with Shutdown |
Order Samples |
| AD8599 |
Dual, Ultralow Distortion, Ultralow Noise Op Amp |
Order Samples |
| AD8605 |
Precision, Low Noise, CMOS, R-R I/O Op Amp |
Order Samples |
| AD8606 |
Dual, Precision, Low Noise, CMOS, R-R I/O Op Amp |
Order Samples |
| AD8607 |
Precision, Low Noise, Micropower, R-R I/O |
Order Samples |
| AD8610 |
Precision, Low Input Bias Current, Wide Bandwidth JFET Op Amp |
Order Samples |
| AD8616 |
24 MHz, CMOS R-R, Dual Op Amplifier |
Order Samples |
| AD8617 |
Micropower, Low Noise, R-R I/O Op Amplifier |
Order Samples |
| AD8627 |
Precision, Low Power, Single-Supply JFET Amp in 5-Lead SC70 |
Order Samples |
| AD8638 |
16 V Auto-Zero, R-R Output Op Amp |
Order Samples |
| AD8642 |
Dual, Low Power, R-R Output Precision JFET Amp |
Order Samples |
| AD8655 |
Precision, Low Noise, CMOS Op Amplifier |
Order Samples |
| AD8656 |
Dual, 2.7 nV/rtHz @ 10 kHz, 250 µV max over VCM, CMOS, R-R I/O Amp |
Order Samples |
| AD8663 |
Low Noise, Precision, 16 V, CMOS, Rail-to-Rail Op Amplifier |
Order Samples |
| AD8667 |
Low Noise, Precision, 16 V, CMOS, Rail-to-Rail Dual Op Amplifier |
Order Samples |
| AD8669 |
Low Noise, Precision, 16 V, CMOS, Rail-to-Rail Operational Amplifier |
Order Samples |
| AD8671 |
Dual, Very Low Noise, Very Low Offset Voltage and Drift, Low Input Bias Current, Low Power Consumption Op Amp |
Order Samples |
| AD8672 |
Very Low Noise, Very Low Offset Voltage and Drift, Low Input Bias Current, Low Power Consumption Op Amp |
Order Samples |
| ADA4841-1 |
Low Power, Low Noise and Distortion, Rail-to-Rail Output Amplifier |
Order Samples |
| ADA4898-1 |
High Voltage, Low Noise, Low Distortion, Unity Gain Stable, High Speed Op Amp |
Order Samples |
| ADA4899-1 |
Unity Gain Stable, Ultralow Distortion and Voltage Noise Amplifier |
Order Samples |
| ADA4922-1 |
High Voltage, Differential 18-bit ADC Driver |
Order Samples |
| ADA4939 |
Ultralow Distortion, Differential 14- and 16-bit ADC Driver |
Order Samples |
| ADA4941-1 |
Single Supply, Differential 18-bit ADC Driver |
Order Samples |
| OP1177 |
Precision, Low Noise, Low Input Bias Current Op Amp |
Order Samples |
| OP2177 |
Dual, Precision, Low Noise, Low Input Bias Current Op Amp |
Order Samples |
| OP282 |
Dual, Low Power, High Speed JFET Op Amp |
Order Samples |
| OP284 |
4 MHz Dual Precision R-R I/O Op Amp |
Order Samples |
| OP296 |
Dual, Micropower, CBCMOS, R-R I/O Op Amp |
Order Samples |
| OP482 |
Quad, Low Power, High Speed JFET Op Amp |
Order Samples |
| OP496 |
Quad, Micropower, CBCMOS, R-R I/O Op Amp |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| ADT7301 |
1°C Accurate, SPI Interface digital temperature sensor in SOT23 package |
Order Samples |
| TMP05 |
1°C Accurrate, Single wire interface digital temperature sensor, low current consumption in SC70 |
Order Samples |
| TMP36 |
2°C Accurate, Analog Voltage output temperature sensor in SOT23 package |
Order Samples |
| ADT75 |
1°C Acccurate, I2C Interface digital temperature sensor |
Order Samples |
| ADT6501 |
Simple Factory Set Trip point temperature sensors in SOT23 packages |
Order Samples |
| ADT6502 |
Simple Factory Set Trip point temperature sensors in SOT23 packages |
Order Samples |
| ADT6503 |
Simple Factory Set Trip point temperature sensors in SOT23 packages |
Order Samples |
| ADT6504 |
Simple Factory Set Trip point temperature sensors in SOT23 packages |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| ADM809 |
Microprocessor Supervisory Circuit in 3-Lead SOT-23 & SC70, Active-Low Push-Pull Output |
Order Samples |
| ADM6711 |
Microprocessor Supervisory Circuit in 4-Lead SC70 |
Order Samples |
| ADM8616 |
Low Voltage Supervisory Circuit with Watchdog in 4-Lead SC-70 |
Order Samples |
| ADM8617 |
Low Voltage Supervisory Circuit with Watchdog in 4-Lead SC70 (Active-low with an Open-Drain Output) |
Order Samples |
| ADP1706 |
1 A, Low Dropout, CMOS Linear Regulator |
Order Samples |
| ADP1707 |
1 A, Low Dropout, CMOS Linear Regulator with Tracking |
Order Samples |
| ADP1708 |
1 A, Low Dropout, CMOS Linear Regulator |
Order Samples |
| ADP1710 |
150 mA, Low Dropout, CMOS Linear Regulator |
Order Samples |
| ADP1712 |
300 mA, Low Dropout CMOS Linear Regulator |
Order Samples |
| ADP1715 |
500 mA Low-Dropout CMOS Linear Regulator with Soft Start |
Order Samples |
| ADP1716 |
500 mA Low-Dropout Linear Regulator with Tracking |
Order Samples |
| ADP1720 |
50 mA, High Voltage, Micropower Linear Regulator |
Order Samples |
| ADP3300 |
High Accuracy anyCAP® 50 mA Low Dropout Linear Regulator |
Order Samples |
| ADP3301 |
High Accuracy anyCAP® 100 mA Low Dropout Linear Regulator |
Order Samples |
| ADP3303 |
High Accuracy anyCAP® 200 mA Low Dropout Linear Regulator |
Order Samples |
| ADP3309 |
anyCAP® 100 mA Low Dropout Linear Regulator |
Order Samples |
| ADP3330 |
High Accuracy Ultralow IQ, 200 mA, SOT-23, anyCAP® Low Dropout Regulator |
Order Samples |
| ADP3331 |
High Accuracy, Ultra-Low Quiescent Current LDO; SOT-23 |
Order Samples |
| ADP3333 |
High Accuracy Ultralow IQ, 300 mA, anyCAP® Low Dropout Regulator |
Order Samples |
| ADP3334 |
High Accuracy Low IQ, 500 mA anyCAP® Adjustable Low Dropout Regulator |
Order Samples |
| ADP3335 |
High Accuracy Ultralow Quiescent Current, 500mA, anyCAP® Low Dropout |
Order Samples |
| ADP3336 |
Small, Adjustable Output, 500 mA anyCAP® Low Dropout Regulator |
Order Samples |
| ADP3338 |
High Accuracy Ultralow Quiscent Current, 1A, anyCAP® Dropout Regulator |
Order Samples |
| ADP3339 |
High-Accuracy Ultralow Iq, 1.5 A, anyCAP® Low Dropout Regulator |
Order Samples |
| ADP3367 |
+5 V Fixed, Adjustable Low-Dropout Linear Voltage Regulator |
Order Samples |
back to top |
| Part # |
Description |
Samples |
| ADG736 |
Low voltage, single supply 2 x SPDT |
Order Samples |
| ADG711 |
Low voltage, single supply 4 x SPST |
Order Samples |
| ADG708 |
Low voltage 3Ω 8:1 Mux |
Order Samples |
| ADG2128 |
8 × 12 I2C compatible buffered switch array with single and dual operation |
Order Samples |
| ADG1408 |
±15V Low Ron (5Ω max) 8:1 Mux |
Order Samples |
| ADG1434 |
±15V Low Ron (5Ω max) 4 × SPDT |
Order Samples |
| ADG1206 |
1.5pF off cap, 0.5pC Qinj ±15V/12V 16:1 Mux |
Order Samples |
| ADG1208 |
±15V Low Capacitance (1pF off Cap) 8:1 Mux |
Order Samples |
| ADG426 |
±15V 16:1 Mux with on chip latches |
Order Samples |
back to top |
Medical Signal Chains:
Blood Analysis Flow Cytometry
Blood Analyzer
Blood Pressure Monitor
Electrocardiogram (ECG/EKG)
Portable AED
Programmable Infusion Pump
Pulse Oximetry
Ultrasound
Wireless ECG Holter Monitor
back to top
Medical Press Releases:
Analog Devices' 16-Bit, 10-MSPS SAR Converter Surpasses Industry Performance Benchmark, June 2008
Medical imaging and data acquisition systems gain precision and throughput with PulSAR® ADC that achieves 15 effective number of bits and 2.5 times faster sample rate.
Monolithic Doppler Phase Shifter For Portable Ultrasound, January 2007
AD8339 quad I/Q demodulator and phase shifter replaces delay lines in medical ultrasound equipment to reduce component count and power consumption.
Analog Devices Enables Superior Image Quality In Portable Ultrasound Medical Diagnostics, April 2007
New ultrasound solution supports high-quality image processing and enables portable systems by reducing component count and power consumption.
Analog Devices' Low-Power Data Conversion Technology Enables New Dimensions in Portability and Performance for Medical and Industrial Electronics, October 2006
ADI's new analog-to-digital converter consumes 80 percent less space and power per conversion than competitive ADCs to enable wireless patient monitors and fast, accurate test and data acquisition equipment.
Industry's Smallest, Lowest Power, High-Speed Octal ADCs Enable Higher Channel Count in Portable medical Designs, September 2006
New family of octal ADCs from Analog Devices includes industry's first 14-bit, high-speed octal ADC, allows portable instrumentation and ultrasound designers to realize up to 60 percent smaller design size and 10 percent lower power consumption as compared to competing devices.
ADI Targets Medical Imaging Applications with Industry's First High-Speed, 14-bit Quad ADC, May 2006
New high-speed, low-power, quad ADCs with serial outputs reduce board space and enable high-resolution in multi-channel medical imaging systems.
back to top
Medical Press Coverage:
Perspectives on Miniaturization
Medical Design Technology, March 2008
Electronics Advances Fuel Home Healthcare Boom
Electronic Design, February 2008
Ultrasound Portable Partitioning
Medical Design Technology, February 2008
Analog IC Gets Smaller, More Complex and Energy Efficient
Design News, October 2007
Advances Trigger an Ultrasonic Boom, June 2006
Impressive technology gains in sensors, signal processing, and software push ultrasound imagers into a host of new medical applications.
back to top
Medical Technical White Papers:
Biopotential Electrode Sensors in ECG/EEG/EMG Systems
Electrocardiography (ECG), electromyography (EMG), and electroencephalography (EEG) systems measure heart, muscle, and brain activity (respectively) over time by measuring electric potentials on the surface of living tissue. more ...
AD9271A Revolutionary Solution for Portable Ultrasound
Medical ultrasound systems are among the more sophisticated signal processing machines in widespread use today. Though analogous to radar or sonar, they operate at RF speeds that are orders of magnitude slower than radar and faster than sonar. more ...
Low Power, Low Voltage IC Choices for ECG System Requirements
Electrophysical measurements have been made on humans and animals since Luigi Galvani first reported on his frog experiments in 1786. Electrocardiographic (ECG) measurements were first performed by a Dutch physician, William Einthoven, early in the 20th century. Electrocardiography refers to a commonly used noninvasive electrophysical measurement procedure for measuring, recording, and subsequently interpreting the electrical potentials that traverse the heart. more ...
Digital Isolation Offers Compact, Low-Cost Solutions to Challenging Design Problems
For designers of isolated systems, rapid advances in digital isolation technology are yielding new capabilities that greatly simplify their job. Examples include integrated, isolated power and truly bidirectional isolation channels that can reduce system costs and save circuit-board real estate. These advances are fueled by a shift away from LED-based optocouplers toward newer isolator technologies that are compatible with standard foundry CMOS processes. They enable integrated circuitry to be packaged with chip-scale microtransformers, thus fitting more functionality into a single package. more ...
Ask the Engineer35: Capacitance Sensors for Human Interfaces to Electronic Equipment
Capacitance sensors detect a change in capacitance when something or someone approaches or touches the sensor. The technique has been used in industrial applications for many years to measure liquid levels, humidity, and material composition. A newer application, coming into widespread use, is in human-to-machine interfaces. more ...
A Practical Guide to High-Speed Printed-Circuit-Board Layout
Despite its critical nature in high-speed circuitry, printed-circuit-board (PCB) layout is often one of the last steps in the design process. There are many aspects to high-speed PCB layout; volumes have been written on the subject. This article addresses high-speed layout from a practical perspective. more ...
back to top
Medical Applications Presentations:
In-Vitro (.ppt, 274,944 bytes)
ECG (.ppt, 931,840 bytes)
back to top
Medical Online Seminars:
Solving Medical Equipment Signal Path Design Challenges: The Analog Rx.
Enabling the Next Generation of Medical Instrumentation
Keeping Your Cool When Measuring Temperature
Options and Solutions for Sensor Signal Conditioning
Leveraging Advanced Converter Architectures for Impedance and Capacitance Sensors
Noise Optimization in Sensor Signal Conditioning Circuits (Part I)
Noise Optimization in Sensor Signal Conditioning Circuits (Part II)
Design Considerations for Multi-channel ADCs
A Practical Guide to High-Speed Printed-Circuit-Board Layout
Online Seminar Library
back to top
Medical Solutions Bulletins:
Medical Electronic ICs (Vol. 8, Issue 4)
Medical Electronic ICs (Vol. 7, Issue 6)
Solutions Bulletin Library (All Bulletins)
back to top