The DC2126A is a high-accuracy wireless temperature sensor, powered from ambient light, built using ADI integrated circuits. A 24-bit delta-sigma ADC reads a thermistor biased from a precision voltage reference. A switching power supply harvests energy from the built-in solar panel, and automatically switches over to the internal battery when no ambient light is available.
At the core of the DC2126A is the LTP5901-IPM, SmartMesh IP wireless mote (node), which provides the ultra-low power wireless mesh connectivity with >99.999% data reliability and communicates the temperature to a central access point (manager). The LTP5901-IPM has on board an ARM Cortex-M3 processor, which can be loaded with user-developed application code using the SmartMesh IP On-Chip Software Development Kit (On-Chip SDK). In the DC2126A, custom application code controls the duty cycling of the voltage reference, samples readings from the ADC and sends the data packet through the SmartMesh IP network, as detailed in this LT Journal article.
|LTC Part Number||Function||Benefits|
|LTC2484||24-bit delta-sigma ADC, reads thermistor||Easy-Drive inputs allow direct hook-up of thermistor|
|LT6654||Low Noise Voltage Reference||Bias thermistor for low noise reading of temperature|
|LTP5901-IPM||SmartMesh IP Mote PCB Module||Automatically forms low power, reliable wireless mesh network.Built-in microprocessor manages ADC and power supplies|
|LTC3330||Energy Harvesting DC/DC Converter||Prioritizes between solar power and battery power|
The DC2126A can be easily added to the DC9000B SmartMesh IP Starter Kit, or any SmartMesh IP network. Temperature readings are sent through the mesh network to a demonstration PC software GUI that displays temperature, and whether the DC2126A is running on solar power or on battery.
DC2126A Demo Manual - step by step instructions to operate the DC2126A
DC2126A Circuit Description (from LT Journal, July 2014) - describes theory of operation of the DC2126A circuit
SmartMesh IP Starter Kits - other SmartMesh IP demo boards
SmartMesh IP On-Chip Software Development Kit - Enables users to develop application code to run on a SmartMesh IP Mote
|Software Name||Software Description||Weblink|
|"DC2126A.exe"||Demonstration GUI software that displays temperature and power source data sent wirelessly through the mesh. Runs on the user's Windows PC connected to a SmartMesh IP network manager.||Part of the SmartMesh IP SDK|
|FTDI Driver||USB-to-Serial drivers for communication with a SmartMesh IP manager (e.g. DC9001B SmartMesh IP Evaluation manager)||Download VCP from ftdichip.com|