For more information about the AD8390 or to inquire about samples, contact the High Current Driver Development Group.

The AD8390 high output current - low power consumption amplifier is particularly well suited for the Central Office driver interface in Digital Subscriber Line systems such as ADSL, SDSL and VDSL. The driver is capable, in full bias operation, of providing 24.4dBm output power into low resistance loads, enough to power a 20.4dBm line, while compensating for losses due to hybrid insertion and back termination resistors.

Four power modes controlled by two digital bits allow the driver bias current to be varied so as to be capable of full performance output 'keep alive state', or two intermediate bias states. Additional bias flexibility is provided from the Iadj pin, which allows fine quiescent current trimming to tailor the performance of the AD8390.

The low power consumption, high output current, high output voltage swing and robust efficient packaging enable the AD8390 to be used as the Central Office (CO) terminal driver in ADSL, VDSL and proprietary xDSL systems.

Part#	Application	Function	Voltage Supply (V)	Minimum Gain (Acl)	-3 dB BW (MHz)	Slew Rate (V/us)	Iout Drive (mA)	Distortion (dBc)	Spectral Noise (nV/rtHz)	Price* (1000-4999)
AD45048	DSL	Driver	+/- 6, 12	-	65	55	230	-80	-	$2.32
AD8320	Cable	CATV Line Driver	5 to 12	n/a	150	n/a	n/a	-57	53	-
AD8322	Cable	CATV Line Driver	5	-	180	-	-	-58	64	$3.19
AD8324	Cable	CATV Line Driver	3.3	-	100	-	-	-59	157	$1.73
AD8325	Cable	CATV Line Driver	5	-	100	-	-	-57	56	$3.34
AD8326	Cable	CATV Line Driver	7 to 12	-	100	-	-	-57	100	$3.95
AD8327	Cable	CATV Line Driver	5	-	160	-	-	-63	64	$3.80
AD8328	Cable	CATV Line Driver	5	-	107	-	-	-57	135	$1.92
AD8390	DSL	Driver	+/- 12	5	100	300	400	-82	8	$2.29
AD8391	DSL	Driver	+/- 6	1	60	600	175	-80	4	$2.13
AD8392	DSL	Driver	+/- 12	1	65	900	400	-82	4	$3.94
AD8393	DSL	Driver	12	5	100	-	500	-73	4	-
ADA4304-2	-	Active RF Splitter	-	-	1600	-	-	-62	-	$0.70
ADA4310-1	-	-	-	1	190	820	-	-69	2.85	$1.45

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.