Short-range Transmitters and Transceivers
Short-range wireless transmitters and transceivers are used in applications such as automatic meter reading, building control/security/automation, wireless sensor networks, health care monitoring, and remote controls for home entertainment systems. Short-range devices use the “ISM” (industrial, scientific, medical) frequency bands for unlicensed operation. ADI’s transmitters and transceivers offer high performance with low cost and power.
Application Notes
- AN-935 : Designing an ADC Transformer-Coupled Front End
- AN-922 : Digital Pulse-Shaping Filter Basics
- AN-915 : CDR Operation for ADF7020, ADF7020-1, ADF7021, and ADF7025
- AN-873 : Lock Detect on the ADF4xxx Family of PLL Synthesizers
- AN-860 : 0: Using an External VCO with the ADF7010
- AN-859 : RF Port Impedance Data, Matching, and External Component Selection for the ADF7020-1
- AN-808 : Multicarrier CDMA2000 Feasibility
The goal of this application note is to determine the feasibility of implementing a multicarrier CDMA2000 transceiver and what the major subsystem performances must be. - AN-807 : Multicarrier WCDMA Feasibility
- AN-780 : 0: Monitoring Negative Voltages with the ADM1062-ADM1069 Super Sequencers™
- AN-756 : Sampled Systems and the Effects of Clock Phase Noise and Jitter
- AN-742 : Frequency Domain Response of Switched-Capacitor ADCs
- AN-737 : How ADIsimADC Models an ADC
- AN-715 : A First Approach to IBIS Models: What They Are and How They Are Generated
- AN-586 : LVDS Outputs for High Speed A/D Converters
High Speed ADCs Uses LVDS (Low-Voltage Differential Signaling) to Minimize Performance Limitations In ADC Applications When Providing High Speed Data Output - AN-345 : Grounding for Low-and-High-Frequency Circuits
Know Your Ground and Signal Paths for Effective Designs. Current Flow Seeks Path of Least Impedance-Not Just Resistance.... - AN-282 : Fundamentals of Sampled Data Systems
Product Reviews
- Quadrature Modulator ICs Span 250-MHz to 4-GHz
(eeProduct Center, 5/8/06)
Technical Articles
- Converters for 3G are Optimized for Cost, Size and Power
by Chris Cloninger, Analog Devices, Inc. (Planet Analog, 4/6/2006) - Make a Truly Linear RF-Power Detector
(EDN, Design Ideas, 9/19/2002) - Matching An ADC To A Transformer
by Rob Reeder, Analog Devices, Inc.
(Microwaves & RF, 7/2007) - Design A Clock-Distribution Strategy With Confidence
by Demetrios Efstathiou (Electronic Design, April 27, 2006) - Digital Potentiometers Vary Amplitude In DDS Devices
(Electronic Design, Ideas for Design, 5/29/2000)