The AD7988-1/AD7988-5 are 16-bit, successive approximation, analog-to-digital converters (ADC) that operate from a single power supply, VDD. The AD7988-1 offers a 100 kSPS throughput, and the AD7988-5 offers a 500 kSPS throughput. They are low power, 16-bit sampling ADCs with a versatile serial interface port. On the CNV rising edge, they sample an analog input, IN+, between 0 V to VREF with respect to a ground sense, IN−. The reference voltage, REF, is applied externally and can be set independent of the supply voltage, VDD.
The SPI-compatible serial interface also features the ability to daisy-chain several ADCs on a single 3-wire bus using the SDI input. It is compatible with 1.8 V, 2.5 V, 3 V, or 5 V logic using the separate supply, VIO.
The AD7988-1/AD7988-5 generics are housed in a 10-lead MSOP or a 10-lead LFCSP (QFN) with operation specified from −40°C to +125°C.Applications
|Title||Content Type||File Type|
|AD7988-1/AD7988-5: 16-Bit Lower Power PulSAR ADCs in MSOP/LFCSP (QFN) Data Sheet (Rev D, 08/2013) (pdf, 583 kB)||Data Sheets|
|Tested ADC Driver to PulSAR ADC||Application Notes||HTML|
|AN-1141: Powering a Dual Supply Precision ADC with Switching Regulators (pdf, 640 kB)||Application Notes|
AN-931: Understanding PulSAR ADC Support Circuitry
(pdf, 299 kB)
This application note discusses in general the pitfalls that occur regularly when using SAR ADCs and, more importantly, how to easily prevent them.
|AN-932: Power Supply Sequencing (pdf, 95 kB)||Application Notes|
|AN-877: Interfacing to High Speed ADCs via SPI (pdf, 1594 kB)||Application Notes|
|AN-935: Designing an ADC Transformer-Coupled Front End (pdf, 363 kB)||Application Notes|
|AN-742: Frequency Domain Response of Switched-Capacitor ADCs (pdf, 401 kB)||Application Notes|
|CN0305: A 16-Bit, 300 kSPS Low Power Successive Approximation ADC System with Optimum Low Power Drive Amplifier for Sub-Nyquist Input Signals Up to 4 kHz (pdf, 271 kB)||Circuit Note|
|The Data Conversion Handbook||Design Handbooks||HTML|
|MT-031: Grounding Data Converters and Solving the Mystery of (pdf, 144 kB)||Tutorials|
|MT-002: What the Nyquist Criterion Means to Your Sampled Data System Design (pdf, 152 kB)||Tutorials|
|MT-001: Taking the Mystery out of the Infamous Formula, "SNR=6.02N + 1.76dB," and Why You Should Care (pdf, 94 kB)||Tutorials|
|UG-682: 6-Lead SOT-23 ADC Driver for the 8-/10-Lead Family of 14-/16-/18-Bit PulSAR ADC Evaluation Boards (pdf, 433 kB)||User Guides|
|UG-340: Evaluation Board for the 10-Lead Family 14-/16-/18-Bit PulSAR ADCs (pdf, 4636 kB)||User Guides|
Voltage Reference Design for Precision Successive-Approximation ADCs
(Analog Dialogue, Volume 47 – June 2013)
|Front-End Amplifier and RC Filter Design for a Precision SAR Analog-to-Digital Converter||Technical Articles||HTML|
|MS-2210: Designing Power Supplies for High Speed ADC (pdf, 327 kB)||Technical Articles|
|MS-2022: Seven Steps to Successful Analog-to-Digital Signal Conversion (Noise Calculation for Proper Signal Conditioning) (pdf, 277 kB)||Technical Articles|
|MS-2124: Understanding AC Behaviors of High Speed ADCs (pdf, 276 kB)||Technical Articles|
SAR ADC & Driver Quick-Match Guide
(pdf, 251 kB)
Find drivers for ADI's most popular single-ended and differential SAR ADCs based on your specific application conditions.
|Product Selection Guide|
|Glossary of EE Terms||Glossary||HTML|
|Title||Content Type||File Type|
|AD7988-5 IBIS Models||IBIS Models||HTML|
|BeMicro FPGA Project for AD7988-5 with Nios driver||FPGA HDL||HTML|
|AD7988-5 FMC-SDP Interposer & Evaluation Board / Xilinx KC705 Reference Design||FPGA HDL||HTML|
Were these recommendations helpful?
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.