ADIS16000, Wireless Gateway Node for Remote Sensor

Thu, 23 May 2013 15:51:32 GMT

The ADIS16000 and ADIS16229 enable creation of a simple wireless vibration-sensing network for a wide variety of industrial equipment applications. . The ADIS16000 provides the gateway function, which manages the network, while the ADIS16229 provides the remote sensing function.

The ADIS16000 SPI interface provides simple connectivity with most

ADIS16229, Digital MEMs Vibration Sensor with Embedded RF Transceiver

Thu, 23 May 2013 15:40:41 GMT

The ADIS16000 SPI interface provides simple connectivity with most

ADF4108S, Aerospace PLL Frequency Synthesizer

Wed, 15 May 2013 14:28:59 GMT

The ADF4108 frequency synthesizer can be used to implement local oscillators in the up-conversion and down-conversion sections of wireless receivers and transmitters. It consists of a low-noise digital PFD (phase frequency detector), a precision charge pump, a programmable reference divider, programmable A and B counters, and a dual-modulus prescaler (P/P + 1). The A (6-bit) and B (13-bit)

ADF4159, Direct Modulation/Fast Waveform Generating, 13 GHz, Fractional-N Frequency Synthesizer

Wed, 15 May 2013 13:20:23 GMT

The ADF4159 is a 13 GHz, fractional-N frequency synthesizer with modulation and both fast and slow waveform generation capability. The part uses a 25-bit fixed modulus, allowing subhertz frequency resolution.

The ADF4159 consists of a low noise digital phase frequency detector (PFD), a precision charge pump, and a programmable reference divider. The Σ-Δ-based fractional interpolator allows

ADP5052, 5-Channel Integrated Power Solution with Quad Buck Regulators and 200 mA LDO Regulator

Tue, 07 May 2013 04:26:56 GMT

The ADP5052 combines four high performance buck regulators and one 200 mA low dropout (LDO) regulator in a 48-lead LFCSP package that meets demanding performance and board space requirements. The device enables direct connection to high input voltages up to 15 V with no preregulators.

Channel 1 and Channel 2 integrate high-side power MOSFETs and low-side MOSFET drivers. External NFETs can

ADP5050, 5-Channel Integrated Power Solution with Quad Buck Regulators, 200 mA LDO Regulator and I²C interface

Tue, 07 May 2013 04:16:24 GMT

The ADP5050 combines four high performance buck regulators and one 200 mA low dropout (LDO) regulator in a 48-lead LFCSP package that meets demanding performance and board space requirements. The device enables direct connection to high input voltages up to 15 V with no preregulators.

Channel 1 and Channel 2 integrate high-side power MOSFETs and low-side MOSFET drivers. External NFETs can

AD8422, High Performance, Low Power, Rail-to-Rail Precision Instrumentation Amplifier

Fri, 03 May 2013 17:47:50 GMT

The AD8422 is a high precision, low power, low noise, rail-to-rail instrumentation amplifier that delivers the best performance per unit microampere in the industry. The AD8422 processes signals with ultralow distortion performance that is load independent over its full output range.

The AD8422 is the third generation development of the industry standard

ADXL313, 3-Axis, ±0.5 g/±1 g/±2 g/±4 g Digital Accelerometer

Wed, 01 May 2013 15:18:00 GMT

The ADXL313 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement up to ±4 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a serial port interface (SPI) (3-wire or 4-wire) or I²C digital interface.

The ADXL313 is well suited for car alarm or black box applications. It measures the static

AD8479, Very High Common-Mode Voltage Precision Difference Amplifier

Tue, 30 Apr 2013 15:53:36 GMT

The AD8479 is a difference amplifier with a very high input common-mode voltage range. The AD8479 is a precision device that allows the user to accurately measure differential signals in the presence of high common-mode voltages up to ±600 V. The AD8479 can replace costly isolation amplifiers in applications that do not require galvanic isolation. The device operates over a ±600 V common-mode

AD8338, Low Power, 18 MHz Variable Gain Amplifier

Mon, 29 Apr 2013 12:16:06 GMT

The AD8338 is a variable gain amplifier (VGA) for applications that require a fully differential signal path, low power, low noise, and a well-defined gain over frequencies from LF to 18 MHz. The device can also operate using single-ended sources if required.

The basic gain function is linear-in-dB with a nominal gain range of 0 dB to 80 dB; the nominal gain range corresponds to a control

ADP7182, -30V, 200mA, Low Noise, Linear Regulator

Wed, 24 Apr 2013 15:43:17 GMT

The ADP7182 is a CMOS, low dropout (LDO) linear regulator that operates from −2.7 V to −28 V and provides up to −200 mA of output current. This high input voltage LDO is ideal for regulation of high performance analog and mixed signal circuits operating from −27 V down to −1.22 V rails. Using an advanced proprietary architecture, it provides high power supply rejection and low noise, and achieves

AD9683, 14-Bit, 170 MSPS/250 MSPS, JESD204B, Analog-to-Digital Converter

Tue, 23 Apr 2013 16:38:46 GMT

The AD9683 is a 14-bit ADC with sampling speeds of up to 250 MSPS. The AD9683 is designed to support communications applications where low cost, small size, wide bandwidth, and versatility are desired.

The ADC core features a multistage, differential pipelined architecture with integrated output error correction logic. The ADC core features wide bandwidth inputs supporting a variety of

AD6677, 80 MHz Bandwidth, IF Receiver

Tue, 23 Apr 2013 16:31:55 GMT

The AD6677 is an 11-bit, 250 MSPS, intermediate frequency (IF) receiver specifically designed to support multi-antenna systems in telecommunication applications where high dynamic range performance, low power, and small size are desired.

The device consists of a high performance analog-to-digital converter (ADC) and a noise shaping requantizer (NSR) digital block. The ADC consists of a

ADP196, 5 V, 3 A Logic Controlled High-Side Power Switch

Mon, 08 Apr 2013 13:01:21 GMT

The ADP196 is a high-side load switch designed for operation from 1.8 V to 5.5 V. This load switch provides power domain isolation, helping to extend battery operation. The device contains a low on-resistance, N-channel MOSFET that supports more than 3 A of continuous current and minimizes power loss. In addition, RDS_ON is constant, independent of the VIN voltage. The low 25 μA

ADP5586, Keypad Decoder and I/O Port Expander

Mon, 01 Apr 2013 12:30:33 GMT

The ADP5586 is a 10-input/output port expander with a built-in keypad matrix decoder, programmable logic, reset generator, and pulse generators. Input/output expander ICs are used in portable devices (phones, remote controls, and cameras) and nonportable applications (healthcare, industrial, and instrumentation). I/O expanders can be used to increase the number of I/Os available to a processor or

ADAS3023, 16-Bit 8 Channel Simultaneous Sampling Data Acquisition System

Thu, 28 Mar 2013 09:58:36 GMT

The ADAS3023 is a complete 16-bit successive approximation based analog-to-digital data acquisition system. This device is capable of simultaneously sampling up to 500 kSPS for two channels, 250 kSPS for four channels, 167 kSPS for six channels, and 125 kSPS for eight channels manufactured on the Analog Devices, Inc., proprietary iCMOS® high voltage industrial process

ADL5906, 10 MHz TO 10 GHz 67 dB TruPwr™ Detector

Fri, 22 Mar 2013 15:56:10 GMT

The ADL5906 is a true rms responding power detector that has a 67 dB measurement range when driven with a single-ended 50 Ω source. The easy to use input makes the ADL5906 frequency versatile by eliminating the need for a balun or any other form of external input tuning for operation up to 10 GHz.

The ADL5906 provides a solution in a variety of high frequency systems requiring an accurate rms

AD5535B, 32-Channel, 14-Bit DAC with Full-Scale Output Voltage Programmable from 50 V to 200 V

Thu, 14 Mar 2013 13:31:39 GMT

The AD5535B is a 32-channel, 14-bit denseDAC® with an on-chip high voltage output amplifier. This device is targeted for optical micro-electromechanical systems. The output voltage range is programmable via the REF_IN pin. The output range is 0 V to 50 V when REF_IN = 1 V, and 0 V to 200 V when REF_IN = 4 V. Each amplifier can source 700 μA, which is ideal for the deflection and control

AD2S93, Low Cost LVDT-to-Digital Converter

Wed, 13 Mar 2013 04:10:56 GMT

The AD2S93 is a complete 14-bit resolution tracking LVDT-todigital converter. A Type II tracking loop is employed to track the A–B input and produce a digital output equal to (A–B)/(REF/2), where REF is a fixed amplitude ac reference phase coherent with the A–B input. This allows the measurement of any 2-, 3-, 4- and 5-wire LVDT or linear amplitude modulated input. The operating frequency range

ADP1190, Integrated 500mA Load Switch with Quad Signal Switch

Fri, 08 Mar 2013 15:35:42 GMT

The ADP1190 is an integrated high-side load switch with 4 signal switches designed for operation from 1.4 V to 3.6 V. This load switch provides power domain isolation for extended power battery life. The load switch is a low on-resistance P-channel MOSFET that supports up to 500 mA of continuous load current and minimizes power loss. Integrated with the load switch are 4 normally open two Ohm SPST

ADL5610, 30 MHz to 6 GHz RF/IF Gain Block

Fri, 08 Mar 2013 08:58:14 GMT

The ADL5610 is a single ended RF/IF gain block amplifier that provides broadband operation from 30 MHz to 6 GHz. The ADL5610 provides a low noise figure of 2 dB with a very high OIP3 of over 38 dBm simultaneously, which delivers a high dynamic range.

The ADL5610 provides a gain of 18 dB, which is stable over frequency, temperature, power supply, and from device to device. The amplifier is

ADL5545, 30 MHz to 6 GHz RF/IF Gain Block

Fri, 08 Mar 2013 07:51:00 GMT

The ADL5545 is a single-ended RF/IF gain block amplifier that provides broadband operation from 30 MHz to 6 GHz. The ADL5545 provides over 36 dBm of OIP3 using only 56 mA from a 5 V supply.

The ADL5545 provides a gain of 24 dB, which is stable over frequency, temperature, power supply, and from device to device. The amplifier is offered in the industry-standard SOT-89 package and is internally

ADL5544, 30 MHz to 6 GHz RF/IF Gain Block

Fri, 08 Mar 2013 06:39:13 GMT

The ADL5544 is a single-ended RF/IF gain block amplifier that provides broadband operation from 30 MHz to 6 GHz. The ADL5544 provides over 34 dBm of OIP3 using only 55 mA from a 5 V supply.

The ADL5544 provides a gain of 17 dB, which is stable over frequency, temperature, power supply, and from device to device. The amplifier is offered in the industry-standard SOT-89 package and is internally

ADP1046A, Digital Controller for Isolated Power Supply Applications

Mon, 25 Feb 2013 15:12:27 GMT

The ADP1046A is a flexible, digital secondary side controller designed for ac-to-dc and isolated dc-to-dc secondary side applications. The ADP1046A is pin-compatible with the ADP1043A and offers several enhancements and new features, including voltage feedforward and improved loop response to maximize efficiency.

The ADP1046A is optimized for minimal component count, maximum flexibility,

ADP1051, Digital Power Supply Controller

Fri, 22 Feb 2013 15:22:54 GMT

The ADP1051 is an advanced digital controller with PMBus^TM interface targeting high density, high efficiency DCDC power conversion. The secondary side controller implements voltage mode control with high speed input line feed-forward for enhanced transient and improved noise performance. The ADP1051 has 6 programmable PWM outputs capable of controlling

ADD5211, Four-String, White LED Driver for LCD Backlight Applications

Thu, 21 Feb 2013 16:52:14 GMT

The ADD5211 is a 4 channel, white LED driver for backlight applications based on high efficiency, current mode, step-up converter technology. The boost controller drives an external MOSFET switch for step-up regulation from an input voltage of 4.5 V to 40 V and a pin adjustable operating frequency between 200 kHz and 1.2 MHz. An adjustable UVLO function is implemented to reduce input current

AD5687R, Dual, 12-Bit nanoDAC+™ with 2 ppm/°C On-Chip Reference and SPI Interface

Fri, 15 Feb 2013 14:58:44 GMT

The AD5687R nanoDAC+™ is a dual, 12-bit, rail-to-rail, voltage output DACs. The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1% FSR gain error and 1.5 mV

ADL5501S, Aerospace 50 MHz TO 6 GHz TruPwr™ Detector

Fri, 15 Feb 2013 07:08:34 GMT

The ADL5501S is a mean-responding power detector for use in high frequency receiver and transmitter signal chains from 50 MHz to 6 GHz. It is easy to apply, requiring only a single supply between 2.7 V and 5.5 V and a power supply decoupling capacitor. The input is internally ac-coupled and has a nominal input impedance of 50 Ω. The output is a linear-responding dc voltage with a conversion

AD9675, Octal Ultrasound AFE with JESD204B

Wed, 13 Feb 2013 15:00:55 GMT

The AD9675 is designed for low cost, low power, small size, and ease of use for medical ultrasound. It contains eight channels of a variable gain amplifier (VGA) with a low noise preamplifier (LNA), a CW harmonic rejection I/Q demodulator with programmable phase rotation, an anti-aliasing filter (AAF), an analog-to-digital converter (ADC), a digital highpass filter and an RF decimation by

ADA4666-2, 18 V, 725 μA, 4 MHz RRIO Dual Operational Amplifier

Wed, 13 Feb 2013 14:22:58 GMT

The ADA4666-2 is a dual, low power, precision, rail-to-rail input/output amplifier optimized for 4 MHz, low power and wide operating supply voltage range applications.

The ADA4666-2 performance is guaranteed at 3.0 V, 10 V, and 18 V power supply voltages. It is an excellent selection for applications using single ended supplies of 3.3V, 5V, 10V, 12V and 15V and dual supplies of ±2.5V, ±3.3V

ADA4661-2, 18 V, Precision, 725 μA, 4 MHz CMOS RRIO Operational Amplifier

Tue, 12 Feb 2013 14:17:25 GMT

The ADA4661-2 is a dual, low power, precision, rail-to-rail input/output amplifier optimized for 4 MHz, low power and wide operating supply voltage range applications.

The ADA4661-2 performance is guaranteed at 3.0 V, 10 V, and 18 V power supply voltages. It is an excellent selection for applications using single ended supplies of 3.3V, 5V, 10V, 12V and 15V and dual supplies of ±2.5V, ±3.3V

AD5689, Dual, 16-Bit nanoDAC+™ with SPI Interface

Fri, 08 Feb 2013 15:44:52 GMT

The AD5689, a member of the nanoDAC+™ family is a low power, dual, 16-bit buffered voltage output DAC. The device includes a gain select pin giving a full-scale output of V_REF (gain = 1) or 2V_VREF (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1% FSR gain error and 1.5 mV offset error

AD5687, Dual, 12-Bit nanoDAC+™ with SPI Interface

Fri, 08 Feb 2013 15:34:29 GMT

The AD5687, a member of the nanoDAC+™ family is a low power, dual, 12-bit buffered voltage output DAC. The device includes a gain select pin giving a full-scale output of V_REF (gain = 1) or 2V_VREF (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1% FSR gain error and 1.5 mV offset error

AD5313R, Dual, 10-Bit nanoDAC® with 2 ppm/°C Reference, SPI Interface

Fri, 08 Feb 2013 15:28:00 GMT

The AD5313R is a member of the nanoDAC® family, is a low power, dual, 10-bit buffered voltage output DACs. The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than

AD5338R, Dual 10-Bit nanoDAC® with 2 ppm/°C Reference, I²C Interface

Fri, 08 Feb 2013 15:20:00 GMT

The AD5338R, a member of the nanoDAC® family is a low power, dual, 10-bit buffered voltage output DAC. The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1%

AD5697R, Dual 12-Bit nanoDAC+™ with 2 ppm/°C Reference, I²C Interface

Fri, 08 Feb 2013 15:18:47 GMT

The AD5697R nanoDAC+™ is a dual, 12-bit, voltage output DACs. The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1% FSR gain error and 1.5 mV offset error

AD5689R, Dual, 16-Bit nanoDAC+™ with 2 ppm/°C On-Chip Reference and SPI Interface

Fri, 08 Feb 2013 15:01:44 GMT

The AD5689R nanoDAC+™ is a dual, 16-bit, rail-to-rail, voltage output DACs. The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1% FSR gain error and 1.5 mV

ADDI9020, 60 MHz CCD Signal Processor with V-Driver and Precision Timing Generator

Thu, 07 Feb 2013 14:34:57 GMT

The ADDI9020 is a complete 60 MHz front-end solution for digital still cameras and other charge-coupled device (CCD) imaging applications. The ADDI9020 includes the analog front end (AFE), a fully programmable timing generator (TG), and a 12-channel V-driver. A Precision Timing® core allows adjustment of high speed clocks with approximately 260 ps resolution at 60

ADUM4190, 5kV rms Isolated Error Amplifier

Wed, 06 Feb 2013 16:28:25 GMT

The ADuM4190 is an isolated error amplifier based on Analog Devices, Inc. iCoupler® technology. The ADuM4190 is ideal for linear feedback power supplies with primary side controllers enabling improvements in transient response, power density and stability as compared to commonly used optocoupler and shunt regulator solutions.

Unlike optocoupler-based solutions, which have an

ADUM3190, 2.5kV rms Isolated Error Amplifier

Wed, 06 Feb 2013 16:08:36 GMT

The ADuM3190 is an isolated error amplifier based on Analog Devices, Inc. iCoupler® technology. The ADuM3190 is ideal for linear feedback power supplies with primary side controllers enabling improvements in transient response, power density and stability as compared to commonly used optocoupler and shunt regulator solutions.

Unlike optocoupler-based solutions, which have an

ADN4612, 11.3 Gbps 12 × 12 Digital Crosspoint Switch

Mon, 04 Feb 2013 05:00:00 GMT

The ADN4612 is a 12 × 12 asynchronous, protocol agnostic, digital crosspoint switch with 12 differential PECL-/CML-compatible inputs and 12 differential CML outputs.

The ADN4612 is optimized for nonreturn-to-zero (NRZ) signaling with data rates of up to 11.3 Gbps per port. Each port offers programmable input equalization, loss-of-signal detection, programmable output swing, and output

AD9119, 11-Bit, 5.6 GSPS, RF Digital-to-Analog Converter

Fri, 01 Feb 2013 19:08:54 GMT

The AD9119/AD9129 are high performance, 11-/14-bit RF digital-to-analog converters (DACs) supporting data rates up to 2.8 GSPS. The DAC core is based on a quad-switch architecture that enables dual-edge clocking operation, effectively increasing the DAC update rate to 5.6 GSPS when configured for Mix-Mode™ or 2× interpolation. The high dynamic range and

AD9129, 14-Bit, 5.6 GSPS, RF Digital-to-Analog Converter

Fri, 01 Feb 2013 15:06:27 GMT

AD9508, 1.65 GHz Clock Fan Out Buffer with Output Dividers and Delay Adjust

Thu, 31 Jan 2013 05:00:00 GMT

The AD9508 provides clock fanout capability in a design that emphasizes low jitter to maximize system performance. This device benefits applications like clocking data converters with demanding phase noise and low jitter requirements.

There are four independent differential clock outputs, each with types of logic levels available. Available logic types include LVDS (1.65 GHz), HSTL (1.65

ADAU7002, Stereo PDM to I²S or TDM Conversion IC

Wed, 30 Jan 2013 14:19:54 GMT

The ADAU7002 converts a stereo PDM bit stream into a PCM output. The source for the PDM data can be two microphones or other PDM sources. The PCM audio data is output on a serial audio interface port in either I2S or TDM format.

The ADAU7002 is specified over the commercial temperature range (−40°C to +85°C). It is available in a halide-free, 8-ball, 1.56 mm × 0.76 mm, wafer level chip

ADUM6212, Dual-Channel Isolators with Integrated DC/DC Converter (0/2 Channel Directionality)

Mon, 28 Jan 2013 16:10:42 GMT

The ADuM6210/ADuM6211/ADuM6212 are dual-channel digital isolators with isoPower®, an integrated, isolated DC/DC converter. Based on the Analog Devices, Inc., iCoupler® technology, the DC/DC converter provides regulated, isolated power, adjustable between 3.15 V and 5.25 V. Input supply

ADUM6211, Dual-Channel Isolators with Integrated DC/DC Converter (1/1 Channel Directionality)

Mon, 28 Jan 2013 16:05:55 GMT

ADUM6210, Dual-Channel Isolators with Integrated DC/DC Converter (2/0 Channel Directionality)

Mon, 28 Jan 2013 15:57:29 GMT

AD9102, Low Power, 14 Bit, 180MSPS, Digital to Analog Converter and Waveform Generator

Mon, 28 Jan 2013 15:18:20 GMT

The AD9102 TxDAC® and Waveform Generator is a high performance DAC integrating on-chip pattern memory for complex waveform generation with a Direct Digital Synthesizer (DDS).

The DDS is a 14-bit output, up to 180Mhz master clock sinewave generator with a 24-bit tuning word allowing 10.8Hz/LSB frequency resolution.

SRAM data can include directly generated stored waveforms, amplitude

ADXL288, High Performance, Dual-Axis Digital Output Accelerometer

Mon, 28 Jan 2013 07:46:37 GMT

The ADXL288 is a dual-axis accelerometer with signal-conditioned outputs available via a 16-bit SPI interface. Identical, independent X and Y sense structures are implemented to create a high performance, high integrity acceleration sensing system.

The X and Y acceleration channels have a nominal full-scale range of ±120 g and a bandwidth of 408 Hz. The acceleration data is

ADXL295, Dual-axis, High Performance Accelerometer with Dual Spectrum Signal Processing

Mon, 28 Jan 2013 07:12:22 GMT

The ADXL195/ADXL295 are dual spectrum accelerometers that measure baseband acceleration in up to two axes (XL-X and XL-Y), as well as high frequency (HF) acceleration energy. Identical, independent X and Y sense structures are implemented to achieve the best possible fail-safe performance.

The XL-X and XL-Y channels output baseband acceleration information with a nominal full-scale range of

ADXL195, Single-axis, High Performance Accelerometer with Dual Spectrum Signal Processing

Mon, 28 Jan 2013 07:10:36 GMT

The XL-X and XL-Y channels output baseband acceleration information with a nominal full-scale range of

ADL5303, 160 dB Range 100 pA to 10 mA Low Cost Logarithmic Converter

Mon, 28 Jan 2013 06:40:18 GMT

The ADL5303 is a monolithic logarithmic detector optimized for the measurement of low frequency signal power in fiber optic systems and offers a large dynamic range in a versatile and easily used form. Wide measurement range and accuracy are achieved using proprietary design and precise laser trimming. The ADL5303 requires only a single positive supply, V_PS, of 5 V. When using low

AD9674, Octal Ultrasound AFE

Fri, 18 Jan 2013 16:52:54 GMT

The AD9674 is designed for low cost, low power, small size, and ease of use for medical ultrasound. It contains eight channels of a variable gain amplifier (VGA) with a low noise preamplifier (LNA), a CW harmonic rejection I/Q demodulator with programmable phase rotation, an anti-aliasing filter (AAF), an analog-to-digital converter (ADC), a digital highpass filter and an RF decimation by

ADUM5212, Dual-Channel Isolators with Integrated DC/DC Converter (0/2 Channel Directionality)

Mon, 14 Jan 2013 19:13:58 GMT

The ADuM5210/ADuM5211/ADuM5212 are dual-channel digital isolators with isoPower®, an integrated, isolated DC/DC converter. Based on the Analog Devices, Inc., iCoupler® technology, the DC/DC converter provides regulated, isolated power, adjustable between 3.15 V and 5.25 V. Input supply

ADUM5211, Dual-Channel Isolators with Integrated DC/DC Converter (1/1 Channel Directionality)

Mon, 14 Jan 2013 19:10:20 GMT

ADUM5210, Dual-Channel Isolators with Integrated DC/DC Converter (2/0 Channel Directionality)

Mon, 14 Jan 2013 19:03:57 GMT

ADV7610, Low Power, 165 MHz HDMI Receiver

Fri, 11 Jan 2013 16:09:09 GMT

The ADV7610 is offered in professional (no HDCP) and industrial versions. The operating temperature range is −40°C to +85°C.

The ADV7610 is a high quality, single input HDMI-capable receiver. It incorporates an HDMI-capable receiver that supports all mandatory 3D TV defined in HDMI specification. The ADV7610 supports formats up to UXGA 60 Hz at eight bits.

It integrates a CEC

ADUM4474, Isolated Switch Regulator with Quad-Channel Isolators (0/4 Channel Directionality)

Fri, 11 Jan 2013 14:04:18 GMT

The ADuM4470/ADuM4471/ADuM4472/ADuM4473/ADuM4474 are quad-channel, digital isolations with a regulated DC/DC isolated power supply controller with an internal MOSFET driver. The DC/DC controller has an internal isolated

ADUM4473, Isolated Switch Regulator with Quad-Channel Isolators (1/3 Channel Directionality)

Fri, 11 Jan 2013 13:58:38 GMT

ADUM4472, Isolated Switch Regulator with Quad-Channel Isolators (2/2 Channel Directionality)

Fri, 11 Jan 2013 13:54:14 GMT

ADUM4471, Isolated Switch Regulator with Quad-Channel Isolators (3/1 Channel Directionality)

Fri, 11 Jan 2013 13:48:49 GMT

ADUM4470, Isolated Switch Regulator with Quad-Channel Isolators (4/0 Channel Directionality)

Fri, 11 Jan 2013 13:42:40 GMT

ADAU1977, Quad ADC with Diagnostics

Wed, 09 Jan 2013 18:57:27 GMT

The ADAU1977 incorporates four high performance analog-todigital converters (ADCs) with direct-coupled inputs capable of 10 V rms. The ADC uses multibit sigma-delta (Σ-Δ) architecture with continuous time front end for low EMI. The ADCs can be connected to the electret microphone (ECM) directly and provide the bias for powering the microphone. Built-in diagnostic circuitry detects faults on input

ADP2380, 20 V, 4 A synchronous Step-Down Regulator with Low-Side Driver

Mon, 07 Jan 2013 18:37:30 GMT

The ADP2380 is a current mode control, synchronous, step-down, dc-to-dc regulator. It integrates a 44 mΩ high-side power MOSFET and a low-side driver to provide a high efficiency solution. The ADP2380 runs from an input voltage of 4.5 V to 20 V and can deliver 4 A of output current. The output voltage can be adjusted to 0.6 V to 90% of the input voltage. The switching frequency of the ADP2380 can

ADV7182, 10-Bit, SDTV Video Decoder with Differential Inputs

Mon, 07 Jan 2013 17:37:51 GMT

The ADV7182 automatically detects and converts standard analog baseband video signals compatible with worldwide NTSC, PAL, and SECAM standards into a 4:2:2 component video data stream. This video data stream is compatible with the 8-bit ITU-R BT.656 interface standard.

External HS, VS, and FIELD signals can provide timing references for LCD controllers and other video ASICs. The accurate

New Products for null | Analog Devices