New Products for Amplifiers and Comparators | Analog Devices

AD8432, Dual-Channel Ultralow Noise Amplifier with Selectable Gain and Input Impedance

Wed, 04 Nov 2009 14:42:51 GMT

The AD8432 is a dual-channel, low power, ultralow noise amplifier with selectable gain and active impedance matching. Each amplifier has a single-ended input, differential output, and integrated input clamps. By pin strapping the gain setting pins, four accurate gains of G = 12.04 dB, 18.06 dB, 21.58 dB, and 24.08 dB (×4, ×8, ×12, and ×16) are possible. A bandwidth of 200 MHz at G = 12.04 dB makes

AD8209, High Voltage, Precision Difference Amplifier

Tue, 03 Nov 2009 15:05:38 GMT

The AD8209 is a single-supply difference amplifier ideal for amplifying and low-pass filtering small differential voltages in the presence of a large common-mode voltage. The input common-mode voltage range extends from −2 V to +45 V at a single +5 V supply. The AD8209 is qualified per AEC-Q100 specifications. The amplifier offers enhanced input overvoltage and ESD protection, and includes EMI

ADA4004-2, 1.8nV/√Hz, 36 V Precision Dual Amplifier

Mon, 02 Nov 2009 20:10:12 GMT

The ADA4004-1/ADA4004-2/ADA4004-4 are 1.8 nV/√Hz precision amplifiers featuring 40 μV offset, 0.7 μV/°C drift, 12 MHz bandwidth, and low 1.7 mA per amplifier supply current.

The ADA4004-1/ADA4004-2/ADA4004-4 are designed on the high performance iPolar™ process, enabling improvements such as reduced noise and power consumption, increased speed and stability, and smaller footprint size.

ADA4424-6, 6-Channel SD/ED/HD Video Filter with Charge Pump

Thu, 08 Oct 2009 05:29:44 GMT

The ADA4424-6 is a high performance video reconstruction filter specifically designed for consumer applications. It consists of a standard definition (SD) section with two fifth-order Butterworth filters, and a high definition (HD) section with three fifth-order filters. The SD section contains an internal Y/C summer for CVBS output, whereas the HD section provides selectable corner frequencies

ADA4692-4, Quad, Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifier

Fri, 25 Sep 2009 12:28:34 GMT

The ADA4692-4 is a quad, rail-to-rail output, single-supply amplifier featuring low power, wide bandwidth, and low noise. These amplifiers are ideal for a wide variety of applications. Audio preamps, filters, IR/photodiode amplifiers, charge amps, and high impedance sensors all benefit from this combination of performance and features.

Applications for these amplifiers include consumer

ADL5601, 50 MHz to 4.0 GHz RF/IF Gain Block

Wed, 23 Sep 2009 16:32:59 GMT

The ADL5601 is a broadband, 15 dB linear amplifier that operates at frequencies up to 4.0 GHz. The device can be used in a wide variety of cellular, cable television (CATV), military, and instru-mentation equipment.

The ADL5601 provides the highest dynamic range available from an internally matched gain block. This is accomplished by providing extremely low noise figures and very high OIP3

AD8235, 40 µA Micropower Instrumentation Amplifier in WLCSP Package

Tue, 08 Sep 2009 21:23:26 GMT

The AD8235 is the smallest and lowest power instrumentation amplifier in the industry. It is available in a 1.5 mm × 2.2 mm wafer level chip scale package (WLCSP). The AD8235 draws a maximum quiescent current of 40 μA. In addition, it draws a maximum 500 nA of current during shutdown mode, making it an excellent instrumentation amplifier for battery powered, portable applications.

The

AD8279, Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2

Fri, 21 Aug 2009 11:55:30 GMT

The AD8278 and AD8279 are general-purpose difference amplifiers intended for precision signal conditioning in power critical applications that require both high performance and low power. The AD8278 and AD8279 provide exceptional common-mode rejection ratio (80 dB) and high bandwidth while amplifying input signals that are well beyond the supply rails. The on-chip resistors are laser trimmed for

AD8279, Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2

Fri, 21 Aug 2009 11:55:30 GMT

AD5750-1, Industrial Current/Voltage Output Driver with Programmable Ranges

Thu, 13 Aug 2009 15:42:44 GMT

The AD5750/AD5750-1 are single-channel, low cost, precision voltage/current output drivers with hardware- or software- programmable output ranges. The software ranges are configured via an SPI-/MICROWIRE™-compatible serial interface. The AD5750/AD5750-1 target applications in PLC and industrial process control. The analog input to the AD5750/AD5750-1 is provided from a low voltage, single-supply

AD8278, Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2

Fri, 07 Aug 2009 14:57:19 GMT

AD5750, Industrial Current/Voltage Output Driver with Programmable Ranges

Tue, 04 Aug 2009 19:33:28 GMT

AD8120, Triple Skew-Compensating Video Delay Line with Analog and Digital Control

Tue, 04 Aug 2009 14:10:06 GMT

The AD8120 is a triple broadband skew delay compensation IC that corrects for time mismatch of video signals incurred by transmission in unshielded twisted pairs of Category-5 and Category-6 type cables. Skew between the individual pairs exists in most types of multi-pair UTP cables due to the different twist-rates used for each pair in order to minimize crosstalk among the pairs. Some pairs are

ADA4051-2, 1.8V, μPower, Zero-Drift, Rail-to-Rail I/O Amplifier

Mon, 03 Aug 2009 18:58:34 GMT

The ADA4051-2 is a CMOS, micropower, zero-drift operational amplifier utilizing an innovative chopping technique. This amplifier features rail-to-rail input and output swing and extremely low offset voltage while operating from a 1.8 V to 5.5 V power supply. This amplifier also offers high PSRR and CMRR, while operating with a supply current of only 13 μA per amplifier. This combination of

AD8622, Dual, Low Power, Low Noise, Low Bias Current, Precision Rail-to-Rail Output Op Amp

Fri, 31 Jul 2009 14:38:07 GMT

The AD8622 is a dual, precision rail-to-rail output operational amplifier with a low supply current of only 350 μA maximum over temperature and supply voltages. It also offers ultralow offset, drift, and voltage noise combined with very low input bias current over the full operating temperature range.

With typical offset voltage of only 10 μV, offset drift of 0.5 μV/°C, and noise of only

AD8277, Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifiers

Fri, 31 Jul 2009 09:08:55 GMT

The AD8276/AD8277 are general-purpose, unity-gain difference amplifiers intended for precision signal conditioning in power critical applications that require both high performance and low power. They provide exceptional common-mode rejection ratio (86 dB) and high bandwidth while amplifying signals well beyond the supply rails. The on-chip resistors are

ADA4691-2, Dual, Low Power, Wideband, Low Noise, Rail-to-Rail Output, Operational Amplifiers

Fri, 31 Jul 2009 04:00:00 GMT

The ADA4691-2 and ADA4692-2 are dual, rail-to-rail output, single-supply amplifiers featuring low power, wide bandwidth, and low noise. The ADA4691-2 has two independent shutdown pins, allowing further reduction in supply current. These amplifiers are ideal for a wide variety of applications. Audio preamps, filters, IR/photodiode amplifiers, charge amps, and high impedance sensors all benefit from

ADA4627-1, 36 V, 19 MHz, Low Noise, Low Bias Current, JFET Operational Amplifier

Thu, 30 Jul 2009 21:11:56 GMT

The ADA4627-1 is a wide bandwidth precision amplifier featuring low noise, very low offset, drift, and bias current. Operation is specified from ±5 V to ±15 V dual supply.

The ADA4627-1 provides benefits previously found in few amplifiers. This amplifier combines the best specifications of precision dc and high speed ac op amps.

With a typical offset voltage of only 70 μV, drift of

ADL5602, 50 MHz to 4.0 GHz RF/IF Gain Block

Wed, 24 Jun 2009 13:55:34 GMT

The ADL5602 is a broadband 20 dB linear amplifier that operates at frequencies up to 4 GHz. The device can be used in a wide variety of cellular, CATV, military, and instrumentation equipment.

The ADL5602 provides the highest dynamic range available from an internally matched gain block. This is accomplished by providing extremely low noise figures and very high OIP3 specifications

AD8227, Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier

Thu, 04 Jun 2009 13:54:51 GMT

The AD8227 is a low cost, wide supply range instrumentation amplifier that requires only one external resistor to set any gain between 5 and 1000. The AD8227 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the signal to make full use of the supply rails. Because the input range can also go below the negative supply, small signals near ground