Application Notes (6)
- AN-940: Low Noise Amplifier Selection Guide for Optimal Noise Performance (pdf, 199 kB)
- AN-713: The Effect of Long-Term Drift on Voltage References (pdf, 237 kB)
- AN-649: Using the Analog Devices Active Filter Design Tool (pdf, 5301 kB)
- AN-579: Versatile Programmable Amplifiers Using Digital Potentiometers with Nonvolatile Memory (pdf, 90 kB)
- AN-358: Noise and Operational Amplifier Circuits (pdf, 593 kB)
- AN-256: Accurately Testing Op Amp Settling Times (pdf, 106 kB)
Circuit Note (12)
- CN-0079: High Precision Digital-to-Analog Conversion Using the 16-Bit AD5542/AD5541 Voltage Output DAC, ADR421 Reference, and AD8628 Auto-Zero Op Amp (pdf)
- CN-0131: 16 Channels of Programmable Output Span Using the AD5360 16-Bit Voltage Output DAC (pdf, 85 kB)
- CN-0148: Layout Considerations for an Expandable Multichannel Simultaneous Sampling Data Acquisition System (DAS) Based on the AD7606 16-Bit, 8-Channel DAS (pdf, 502 kB)
- CN-0150: Software Calibrated, 1 MHz to 8 GHz, 70 dB RF Power Measurement System Using the AD8318 Logarithmic Detector (pdf, 250 kB)
- CN-0151: Versatile High Precision Programmable Current Sources Using DACs, Op Amps, and MOSFET Transistors (pdf, 234 kB)
- CN-0169: How to Achieve High Precision Voltage Level Setting Using the AD5542A/AD5541A 16-Bit Voltage Output DAC (pdf, 457 kB)
- CN-0175: A Low Cost, 8-Channel, Simultaneously Sampled, Data Acquisition System with 84 dB SNR and Excellent Channel-to-Channel Matching (pdf, 347 kB)
- CN-0181: Precision, 16-Bit, Voltage Level Setting with Less than 5 mW Total Power Dissipation (pdf, 175 kB)
- CN-0200: 18-Bit, Linear, Low Noise, Precision Bipolar ±10 V DC Voltage Source (pdf, 327 kB)
- CN-0257: 20-Bit, Linear, Low Noise, Precision, Unipolar +10 V DC Voltage Source (pdf, 353 kB)
- CN-0318: 16-Bit, Linear, Ultra Stable, Low Noise, Bipolar ±10 V DC Voltage Source (pdf, 370 kB)
- CN0191: 20-Bit, Linear, Low Noise, Precision, Bipolar ±10V DC Voltage Source (pdf, 178 kB)
Technical Articles (2)
-
Designing DACs into Precision Industrial 10-V Applications
by Brendan Cronin, Analog Devices, Inc. (PlanetAnalog, 3/23/2006) - iPolar™ - revolutionary new high-voltage analog manufacturing process technology breathes new life into industrial bipolar devices
ADIsim Design/Simulation Tools (1)
-
Analog Filter Wizard 2.0
The Analog Filter Wizard™ helps you design a low-pass, high-pass, band-pass or band-stop filter with actual op amps. It then simulates the filter’s performance with these op amps in real time. You can ask the tool to optimize for power, noise, or voltage range, and it will pick op amps and passive components appropriately. Or you can adjust the components manually yourself.
Amplifier Error Budget Analysis (1)
-
OpAmp Error Budget Calculator
An online tool to illustrate range, gain and accuracy issues in simple opamp buffers.
Data Sheets (5)
- AD5512A/AD5542A: 2.7 V to 5.5 V, Serial-Input, Voltage-Output, 12-/16-Bit DAC (Rev A, 05/2011) (pdf, 423 kB)
- AD5541A: 2.7 V to 5.5 V, Serial-Input, Voltage- Output, Unbuffered 16-Bit DAC (Rev A, 03/2011) (pdf, 352 kB)
- AD8675: 36 V Precision, 2.8 nV/√Hz Rail-to-Rail Output Op Amp Data Sheet (Rev E, 07/2012) (pdf, 360 kB)
- ADR420/ADR421/ADR423/ADR425: Ultraprecision, Low Noise, 2.048 V/2.500 V/3.00 V/5.00 V XFET® Voltage References Data Sheet (Rev I, 05/2011) (pdf, 544 kB)
- OP1177/OP2177/OP4177: Precision Low Noise, Low InputBias Current Operational Amplifiers Data Sheet (Rev G, 11/2009) (pdf, 487 kB)
Design Calculators (2)
- Voltage Reference Selection & Evaluation Wizard
-
Voltage Reference Wizard (downloadable)
This Wizard helps you select the most suitable voltage for a use with a data converter. Supply the Wizard with a given data converter; it will provide you with a number of suitable references plus the maximum DC error contributed to your overall system. Or enter the amount of DC error your system can tolerate and find out which of ADI’s reference and data converter pairs will meet your requirement.
Design Handbooks (1)
Device Drivers (3)
Documentation (2)
FAQs/RAQs (2)
FPGA HDL (5)
Overview (3)
-
ICs for Programmable Logic Control and Distributed Control Systems
(pdf, 976 kB)
Analog Devices leadership in industrial IC technology, with the development of the iCMOS™ and iPolar™ processes, has uniquely defined high voltage and low voltage integration to deliver smaller, higher performance, and more cost effective ICs for industrial systems. - iPolar 36 V Precision Process Technology for Industrial and Instrumentation Applications
- Programmable Current and Voltage Output Drivers (pdf, 1369 kB)
Product Reviews (3)
-
Analog Devices rolls out iPolar signal-conditioning amplifiers
(EDN, 5/17/2005) -
ICs Tackle Industrial Apps With Advanced Trench Technology
(Electronic Design, 6/9/2005) -
Low-Power Data Conversion Technology Enhances Portability
(Electropages, 10/5/2006)
Solutions Bulletins (2)
SPICE Models (2)
- AD8675 SPICE Macro Model
- OP1177 SPICE Macro-Model
Tutorials (3)
- MT-015: Basic DAC Architectures II: Binary DACs (pdf, 100 kB)
- MT-016: Basic DAC Architectures III: Segmented DACs (pdf, 79 kB)
- MT-035: Op Amp Inputs, Outputs, Single-Supply, and Rail-to-Rail Issues (pdf, 115 kB)
Analog Dialogue (3)
-
High Speed Op Amp Drives a 16-Bit, 1-MSPS Differential-Input A/D Converter
(Analog Dialogue, Vol. 36, No. 6, November/December 2002) -
High-Performance Multichannel Power-Line Monitoring with Simultaneous-Sampling ADCs
By Colm Slattery, Analog Devices, Inc. (Analog Dialogue, Vol. 41, January 2007) -
Op-Amp Issues--Noise
- Part 1: Ask The Applications Engineer-7
-
Part 2: Ask The Applications Engineer-8
(Analog Dialogue, 30th Anniversary Reader Bonus)
