ADP1607

2 MHz、同步升压DC-DC转换器
Manufactured by:

产品详情

ADP1607是一款高效、同步、固定频率、升压DC-DC开关转换器,能够提供介于1.8 V和3.3 V之间的可调输出电压,适合便携式应用。

2 MHz的工作频率支持使用小尺寸、薄型外部元件。此外,凭借同步整流、内部补偿、内部固定限流和电流模式架构可确保出色的瞬态响应和最少的外部器件数量。

其他主要特性包括固定PWM和轻负载PFM模式选项、真正的输出隔离、热关断(TSD)以及逻辑控制使能。ADP1607采用无铅薄型6引脚LFCSP封装,适合在便携式器件中实现高效节能。

应用
  • 1电池单元和2电池单元碱性及NiMH/NiCd电池供电器件
  • 便携式音频播放器、仪器仪表和医疗器械
  • 太阳能电池应用
  • 小型硬盘电源
  • 电源LED状态指示器

产品生命周期

checked 推荐新设计使用

本产品已上市。数据手册包含所有最终性能规格和工作条件。ADI公司推荐新设计使用这些产品。

评估套件

X +

产品详情

This page conatins evaluation board ordering information for evaluating the ADP1607.

产品详情

The ADP1606/ADP1607 are high efficiency, synchronous, fixed frequency, step-up, dc-to-dc switching converters for use in portable applications.

The ADP1606/ADP1607 evaluation boards are complete step-up, dc-to-dc switching converter applications with components selected to allow operation over the full input voltage and load ranges. The ADP1606 evaluation board has a 1.8 V fixed output voltage and requires no external resistors. The ADP1607 evaluation boards are set to transition automatically between PFM and PWM (ADP1607-EVALZ) or fixed to operate in PWM mode only (ADP1607-001-EVALZ). The ADP1607 evaluation boards can be adjusted for different output voltages by changing the feedback resistors, R1 and R2.

The 2 MHz operating frequency enables the use of small footprint, low profile external components. Additionally, the synchronous rectification, internal compensation, internal fixed current limit, and current mode architecture allow excellent transient response and a minimal external part count. Other key features include fixed PWM and light load PFM mode options, true output isolation, thermal shutdown (TSD), and logic controlled enable.

This user guide includes input/output descriptions, setup instructions, and the schematics and printed circuit board (PCB) layout drawings for the ADP1606/ADP1607 step-up converter evaluation boards.

Complete specifications for the ADP1606/ADP1607 are available in the ADP1606/ ADP1607 data sheet, which should be consulted in conjunction with this document when using the evaluation boards.

产品详情

In order to get the correct unpopulated evaluation board with an appropriate Bill of Materials and Schematic, you need to use the button for "Request Evaluation Board" from within the design tool. Make sure the design tool is in a state that matches your desired power requirements.

This will create a template email that will request from us the proper blank evaluation board for that ADI part and your application's power parameters.


Note: Some parts have multiple blank boards for high/low current or for different topologies (Boost, SEPIC, SEPIC-Cuk), while other blank boards support multiple ADI parts. This is why it is important to run the design tool with your parameters before making your email request from the tool.

设计资源

X +

设计资源

ADI始终把满足您最高可靠性水平的产品放在首要位置。我们通过在所有产品、工艺设计和制造过程中引入高质量和可靠性检查实践这一承诺。发运的产品实现“零缺陷”始终是我们的目标。

ADP1607 材料声明
PCN-PDN信息 质量和可靠性 原理图符号和PCB封装

讨论

X+

没有找到你想要的?

样片申请及购买

X+
返回
查询库存

这里所列出的美国报价单仅供预算参考,指美元报价(规定订量的每片美元,美国离岸价),如有修改不再另行通知。由于地区关税、商业税、汇率及手续费原因,国际报价可能不同。对于特殊批量报价,请与您当地的ADI公司办事处或代理商联络。对于评估板和套件的报价是指一个单位价格。


价格表帮助

 

购买评估板 所示报价为单片价格
所示报价为单片价格。所列的美国报价单仅供预算参考,指美元报价(每片美国离岸价),如有修改恕不另行通知。由于地区关税、商业税、汇率及手续费原因,国际报价可能不同。