ADP220

双通道200mA、微功耗、低噪声、高PSRR CMOS稳压器
Manufactured by:

产品详情

200mA双通道输出的ADP220在一个稳压器里结合了高PSRR(电源抑制比)、低噪声、低静态电流和低压差等特性,非常适用于要求苛刻性能和电路板空间受限的无线应用。 ADP220的低静态电流、低压差及宽输入电压范围可延长便携式设备的电池续航时间。在高达100KHz的工作频率时,ADP220可实现很低的电压余量并保持高于60dB的电源抑制。相对于其它竞争LDO产品,ADP220能提供更低的噪声特性且无需噪声旁路电容。ADP221内置一个有源的下拉电路来使输出负载快速放电。

ADP220采用微型6焊球WLCSP封装,仅需极小的1uF±30%陶瓷输出电容即可稳定工作,能以最小的电路板面积满足多种移动电源需求。ADP220提供多种输出电压组合,从0.8V到3.3V,并且提供过流和热保护功能,可防止在这些情况受到损害。

产品生命周期

checked 量产

该产品系列中至少有一个型号已量产并可供采购。该产品适合用于新设计,但也可能有更新的替代产品。

评估套件

X +

产品详情

这些评估板用于演示线性调节器ADP220的功能。

只需一个电压源、一个电压表、一个电流表和一些负载电阻,就可以完成简单的器件测量,如线路和负载调整率、压差、地电流等。

产品详情

In order to get the correct unpopulated evaluation board with an appropriate Bill of Materials and Schematic, you need to use the button for "Request Evaluation Board" from within the design tool. Make sure the design tool is in a state that matches your desired power requirements.

This will create a template email that will request from us the proper blank evaluation board for that ADI part and your application's power parameters.


Note: Some parts have multiple blank boards for high/low current or for different topologies (Boost, SEPIC, SEPIC-Cuk), while other blank boards support multiple ADI parts. This is why it is important to run the design tool with your parameters before making your email request from the tool.

ADZS-BF707-BLIP2 电路图

产品详情

The BlackFin Low-power Imaging Platform (BLIP) is a low cost, low power embedded computer vision platform targeting a vast array of real-time sensing applications. BLIP leverages the latest entry within the industry-leading, low power Blackfin processor family as well as Analog Devices’ optimized software library deliverables. This solution offers end equipment manufacturers an out of the box form factor development platform with multiple functional profiles covering intelligent motion sensing, people counting, vehicle detection, and face detection deployable in both indoor and outdoor use cases. The BLIP system includes an intuitive configuration GUI and enables real-time analysis of captured video, as well as video output/display through an on-board USB port, making it a highly valuable tool for product development. Additionally, the associated documentation package is well positioned to help customers accelerate their time to market.

文档

X +

设计资源

X +

设计资源

ADI始终把满足您最高可靠性水平的产品放在首要位置。我们通过在所有产品、工艺设计和制造过程中引入高质量和可靠性检查实践这一承诺。发运的产品实现“零缺陷”始终是我们的目标。

ADP220 材料声明
PCN-PDN信息 质量和可靠性 原理图符号和PCB封装

讨论

X+

没有找到你想要的?

样片申请及购买

X+
返回
查询库存

这里所列出的美国报价单仅供预算参考,指美元报价(规定订量的每片美元,美国离岸价),如有修改不再另行通知。由于地区关税、商业税、汇率及手续费原因,国际报价可能不同。对于特殊批量报价,请与您当地的ADI公司办事处或代理商联络。对于评估板和套件的报价是指一个单位价格。


价格表帮助

 

购买评估板 所示报价为单片价格
所示报价为单片价格。所列的美国报价单仅供预算参考,指美元报价(每片美国离岸价),如有修改恕不另行通知。由于地区关税、商业税、汇率及手续费原因,国际报价可能不同。